Use and Care Manual

10 11
MAINTENANCE
WARNING: To avoid accidents, turn OFF and unplug the tool from the electrical outlet before cleaning,
adjusting, or performing any maintenance work.
WARNING: Any attempt to repair or replace electrical parts on this tool may be hazardous. Servicing
of the tool must be performed by a qualified technician. When servicing, use only identical WEN replacement
parts. Use of other parts may be hazardous or induce product failure.
ROUTINE INSPECTION
Before each use, inspect the general condition of the tool. If any of these following conditions exist, do not use until
parts are replaced or the sharpener is properly repaired.
Check for:
• Loose hardware,
• Damaged cord/electrical wiring,
• Cracked or broken parts, and
• Any other condition that may affect its safe operation
CLEANING & STORAGE
1. Keep the ventilation openings free from dust and debris to prevent the motor from overheating.
2. Wipe the tool surfaces clean with a damp cloth and mild soap. Make sure water does not get into the tool.
CAUTION: Most plastics are susceptible to damage from various types of commercial solvents. Do not use
any solvents or cleaning products that could damage the plastic parts. Some of these include but are not
limited to: gasoline, carbon tetrachloride, chlorinated cleaning solvents, and household detergents that contain
ammonia.
4. Allow the tool to cool before storing it. Store the tool in a clean and dry place away from the reach of children.
PRODUCT DISPOSAL
Used power tools should not be disposed of together with household waste. This product contains electronic
components that should be recycled. Please take this product to your local recycling facility for responsible
disposal and to minimize its environmental impact.