20V MAX IMPACT DRIVER Model # 49135 bit.ly/wenvideo 4002634 IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe, reliable service.
TABLE OF CONTENTS Technical Data General Safety Rules Specific Safety Rules for Batteries & Chargers Safety Rules for Impact Drivers Electrical Information Know Your Impact Driver Operation Maintenance Exploded View Parts List Warranty 2 3 5 7 8 9 10 11 12 13 14 TECHNICAL DATA Model Number: Charger Input Voltage: Charger Output Voltage: Battery Specs: Max Torque: Chuck Capacity: Speed: Impact Frequency: Dimensions: Weight: 49135 120V, 60 Hz, 0.5A, 60W 20V, 2.0A, 40W 20V Max Lithium Ion, 1.
GENERAL SAFETY RULES You know the drill. The purpose of the following safety symbols is to attract your attention to possible dangers. We don’t want any of our beloved WEN customers accidentally injuring themselves. The safety symbols and the explanations with them deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. These instructions and warnings are not substitutes for proper accident prevention measures.
GENERAL SAFETY RULES Safety is a combination of common sense, staying alert, knowing how your item works, and not doing dumb stuff on purpose. SAVE THESE SAFETY INSTRUCTIONS. WARNING: To avoid mistakes and serious injury, do not plug in your tool until the following steps have been read and understood. 1. READ and become familiar with this entire instruction manual. LEARN the tool’s applications, limitations, and possible hazards. 2. AVOID DANGEROUS CONDITIONS.
GENERAL SAFETY RULES 15. DO NOT OVERREACH. Keep proper footing and balance at all times. Wear oil-resistant rubber-soled footwear. Keep the floor clear of oil, scrap, and other debris. 16. MAINTAIN TOOLS PROPERLY. ALWAYS keep tools clean and in good working order. Follow instructions for lubricating and changing accessories. 17. CHECK FOR DAMAGED PARTS. Check for alignment of moving parts, jamming, breakage, improper mounting, or any other conditions that may affect the tool’s operation.
SAFETY RULES FOR BATTERIES 10. Do not operate the charger or the battery if it has received a sharp blow, either from being dropped or damaged. Take it to a qualified service technician before attempting to use. 11. Do not disassemble the charger or the battery pack. Take these to a qualified service technician when service or repairs are required. Incorrect assembly may result in electric shock or fire. 12.
SAFETY RULES FOR CHARGERS CHARGER Protect the battery charger and its cord from damage. Keep the charger and its cord away from heat, oil and sharp edges. Electrical plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with grounded appliances. Unmodified plugs and matching outlets will reduce the risk of electric shock. Keep the battery charger, battery pack(s) and the cordless tool out of the reach of children.
ELECTRICAL INFORMATION GROUNDING INSTRUCTIONS IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least resistance for an electric current and reduces the risk of electric shock. This charger is equipped with an electric cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching outlet that is properly installed and grounded in accordance with ALL local codes and ordinances. DO NOT MODIFY THE PLUG PROVIDED.
KNOW YOUR IMPACT DRIVER Directional Switch & Safety 1/4-Inch Quick Connect Hex Drive Chuck 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 R 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Strap R LED Work Light Q Q P Trigger N P Metal Belt Clip Battery Power Indicator N M Battery M L L K K J J H G H F G E Battery F D Release Tab Quick Charger E C B D UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGU
OPERATION INSTALLING OR REMOVING THE BATTERY Look, we both know that you understand how to put this battery into the impact driver. It’s not rocket science. I’m going to tell you anyway though because once these manuals stop needing to be written, then I’m out of a job. 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 8 7 R 1. Slide the battery pack into the bottom of the tool housing until it locks into place with a click.
OPERATION GENERAL SCREWDRIVING 1. Clamp your workpiece down. 2. Drill pilot holes for larger screws or when driving screws into harder woods. 3. Exert enough pressure to start the screw and keep it turning. Do not force the screw. Let the tool do the work. 4. Use a speed that will not strip the screw head or break the screw. Maintain your balance. 5. When driving nuts or bolts first hand feed the connectors to avoid cross threading. Do not overdrive connectors. 6.
EXPLODED VIEW 12
EXPLODED VIEW No.
LIMITED TWO YEAR WARRANTY WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
