Installation Instructions

8. Prepare an approved gasoline-storage container. Position it underneath the carburetor
drainage hose, shown by the blue arrow in Figure 9 below. Using the Phillips head screwdriver,
loosen the carburetor drain screw (shown by the yellow arrow in Figure 9 below) to drain the
carburetor.
9. Once the carburetor is fully drained, remove the carburetor bowl screw shown by the red
arrow in Figure 9 above. This exposes the main jet nozzle, shown in Figure 10 below.
Figure 9: Carburetor bowl mounting screw (red), drainage hose (blue), drain screw
(yellow).
Figure 10: The jet nozzle is shown here, with the float pushed up.