Installation Instructions

Turn off the fuel valve (refer to the instructions in your manual). Using an approved gasoline-
storage container, drain the carburetor (loosen the screw indicated by the red arrow in Figure 13
above). Once it is drained, the bowl can be removed (by removing the screw indicated by the
blue arrow in Figure 13 above. Then replace the main jet. Refer to Figure 14 below.
QUESTIONS? CONCERNS?
CALL OUR CUSTOMER SERVICE HOTLINE AT 1-800-232-1195, M – F, 8 – 5
CENTRAL TIME, OR EMAIL [e-mail].
Figure 13: The carburetor is located behind the air filter housing.
Figure 14: The main jet is on the side of the main stem.