Use and Care Manual

18
SUBSEQUENT STARTING OF THE LOG SPLITTER
WARNING: This engine may emit highly flammable and explosive gasoline vapors, which can cause
severe burns or even death if ignited. A nearby open flame can lead to explosion even if not directly in
contact with fuel.
• Do not operate near open flame.
• Do not smoke near log splitter.
• Always operate on a firm, level surface.
• Always turn log splitter off before refueling. Allow engine to cool for at least 2 minutes before removing fuel
cap. Loosen cap slowly to relieve pressure in tank.
• Do not overfill fuel tank. Gasoline may expand during operation. Do not fill to the top of the tank. Allow for
expansion.
• Always check for spilled fuel before operating. Clean up any spilled fuel before starting.
• Empty fuel tank before storing or transporting the log splitter.
• Before transporting, turn fuel valve to the off position.
IMPORTANT:
• Use only UNLEADED gasoline.
• Do not use old gasoline.
• Never use an oil/gasoline mixture.
• Avoid getting dirt or water into the fuel tank.
Step 3 - CHECK THE HYDRAULIC FLUID LEVEL
1. Remove hydraulic dipstick and check the hydraulic fluid level. Note: Do not screw in dipstick when checking
oil level.
2. If needed, add additional hydraulic fluid.
Hydraulic Dipstick