Use and Care Manual

9
ASSEMBLY
1. Lock the support leg (4) in its downward position be-
fore starting.
2. Slide the tow bar (1) into the pivot mount (3). Fasten
it in place using the included bolts (2) and nuts (5) as
shown in Figures 2A and 2B.
1. Tow Bar
2. Bolts
3. Pivot Mount
4. Support Leg
5. Nuts
1
2
3
4
5
STEP 2 - ATTACHING THE TOW BAR TO
THE HYDRAULIC TANK (FIGURE 2)
Figure 2BFigure 2A
STEP 3 - ATTACHING THE ENGINE TO
THE HYDRAULIC TANK (FIGURE 3)
1. Place the engine (1) as shown in position on top of the
engine mount plate (5).
2. Install the engine to the engine mount plate using bolts,
washers and nuts. Make sure to insert the bolt from the
bottom side of the engine mount plate as shown in Fig-
ure 3.
5
6
Figure 2
Figure 3A
Figure 3B
Figure 3
1
2
3
4
1. Engine
2. Nuts (4)
3. Spring Washers (4)
4. Top Washers (4)
5. Engine Mount Plate
6. Bolts (4)