User Manual

11
TOOL PARK REST
The park rest swings down to help keep the blade from coming into contact with the work surface when the
planer is not in use. The tool park rest was designed to swing up and out of the way by it itself when the back of
the planer crosses the leading edge of the workpiece.
PARALLEL FENCE
CAUTION: Always ensure that the tool is switched off and unplugged from the power supply. Wait
until the blades have come to a complete standstill before installing or adjusting the parallel fence.
1. Disconnect the planer from the power source.
2. Use the bracket fixing knob to secure the parallel fence bracket to the left-hand side of the planer.
3. Slide the parallel fence onto the bracket. Position the fence to the desired width.
4. Lock the parallel fence in position with the fence knob and coach bolt.
OPERATION
TOOL PARK REST