Product Manual

ASSEMBLY
Carriage Bolts x 16
M8 Washers x 16
M8-1.25 Hex Nuts x 16
1. Place the table top on the floor, install one leg to a corner
of the table top using four carriage bolts, M8 washers and
M8-1.25 hex nuts. Repeat with all four legs. Finger tighten
the bolts to leave room for adjustments when attaching the
base.
6
STEP 1: INSTALL THE LEGS ONTO THE TABLE TOP
STEP 2: INSTALL THE BASE
Tabletop x 1
2. Attach the table top and leg assembly to the base. Secure
each of the four corners with four carriage bolts, M8
washers and M8-1.25 hex nuts. After setting the position,
fully tighten all 24 bolts connecting the legs with the tabletop
and the base assembly.

Carriage Bolts x 8
M8 Washers x 8
M8-1.25 Hex Nuts x 8

Base Assembly x 1
Legs x 4
