Use and Care Manual

ManualsBrandsWEN ManualsBelt Sanders10.5 Amp 10 in. Drum Sander with Rolling Stand and Variable Speed Conveyor

TABLE OF CONTENTS

TECHNICAL DATA

Model Number:

Motor:

Drum Speed:

Sandpaper Speed:

Conveyor Feed Speed:

Maximum Workpiece Width:

Minimum Workpiece Width:

Maximum Workpiece Height:

Minimum Workpiece Height:

Minimum Workpiece Length

Sandpaper Width:

Sandpaper Length:

Sanding Drum Size:

Dust Port Diameter:

Floor-To-Table Height

Assembled Dimensions:

Weight:

65910

120V, 60Hz, 10.5A

1440 RPM (50Hz)

2300 FPM

0 to 10 FPM

9-7/8 in. (250mm)

3/4 in. (19mm)

3-1/8 in. (80mm)

3/16 in. (5mm)

4-3/4 in. (120mm)

3-1/4 in. (82mm)

62-1/2 in. (1585mm)

5-1/8 x 10-1/4 in. (132 x 260mm)

3.9 in. (100 mm)

27-1/8 in.

28-3/8 x 23-1/4 x 47-1/4 in.

159 lbs

Technical Data

Safety Introduction

General Safety Rules

Electrical Information

Specific Rules for Drum Sanders

Know Your Drum Sander

Unpacking

Assembly

Preparation

Operation

Adjustments

Maintenance

Troubleshooting

Exploded View and Parts List

Warranty Statement

NOTE: Your drum sander is compatible with the WEN 28200

10 ft. dust hose and the WEN 28221 20 ft. dust hose, available at

wenproducts.com.

Sandpaper may be purchased from wenproducts.com by searching

the product model number.