Use and Care Manual

WARNING: Sanding produces a lot of dust that could be harmful to your health. Always operate using

a dust collection system and approved face mask to minimize the risk of lung damage from dust inhala-

tion. DO NOT operate the drum sander without an adequate dust collection system.

1. Install the dust port onto the drum cover.

2. Fit a 4-inch dust hose (not included) over the dust port and

secure it in place with a hose clamp (not included). A tight fit is

necessary for proper dust collection performance.

3. Connect the dust hose to your dust-collection system of choice.

NOTE: The dust port on your sander is compatible with the WEN

28200 10 ft. dust hose and the WEN 28221 20 ft. dust hose, avail-

able at wenproducts.com.

Dust Port (x1)

Dust hose and hose clamp (x1)

(not included)

ASSEMBLY

STEP 6: MOUNTING THE DUST PORT (Fig. 6)

Fig. 6