Use and Care Manual

TABLE OF CONTENTS

Specifications ......................................................................................2

Introduction ........................................................................................3

General Safety Rules ...........................................................................4

Electrical Information ..........................................................................6

Specific Rules for Your Drum Sander ..................................................7

Know Your Drum Sander .....................................................................8

Unpacking ...........................................................................................9

Assembly ..........................................................................................10

Sandpaper Installation .......................................................................14

Preparation ........................................................................................16

Adjustments ......................................................................................21

Maintenance ......................................................................................25

Troubleshooting Guide ......................................................................28

Exploded View & Parts List ...............................................................30

Warranty Statement ...........................................................................34

SPECIFICATIONS

Model Number 65911

Motor 120V, 60Hz, 10.5A

Drum Speed 1700 RPM (60Hz)

Sandpaper Speed 2300 FPM

Conveyor Feed Speed 0 to 10 FPM

Maximum Workpiece Width 9-7/8" (250mm)

Minimum Workpiece Width 3/4" (19mm)

Maximum Workpiece Height 3-1/8" (80mm)

Minimum Workpiece Height 3/16" (5mm)

Minimum Workpiece Length 4-3/4" (120mm)

Sandpaper Width 3-1/4" (82mm)

Sandpaper Length 62-1/2" (1585mm)

Sanding Drum Size 5-1/8" x 10-1/4" (132mm x 260mm)

Dust Port Diameter 4" (101.6mm)

Floor-to-Conveyor Height 30-1/4"

Assembled Dimension 28-3/8" x 23-1/4" x 47-1/4"

Weight 161 lbs

NOTE: Your drum sander is compatible with the WEN 28200 10 ft. dust hose and the WEN 28221 20 ft.

dust hose, available at wenproducts.com.

Sandpaper may be purchased from wenproducts.com by searching 65910.