Instructions / Assembly

MODEL 721830
18 X 30 INCH
(TWO PACK)
DOLLY
Maximum Dynamic Load:
Maximum Static Load:
Product Dimensions:
Product Weight:
660 lbs
1000 lbs
29-3/4 x 17-3/4 x 5-1/4 inch
7.7 lbs
SPECIFICATIONS
ASSEMBLY INSTRUCTIONS
PARTS LIST
1. Remove all 16 nuts (B) pre-installed on the base of the dolly using an 11mm socket or wrench.
2. Install the caster (A) onto the four screws (C) on the corner of the dolly.
3. Secure the caster using the four nuts (B) and tighten the nuts using an 11mm socket or wrench.
4. Repeat with all four casters. Check that all the nuts are tightened and the casters have been prop-
erly installed before operating the dolly.
NO. PART NO. DESCRIPTION QTY.
A 721830-001 Caster 4
B 721218-002 Nut M6 16
C 721218-003 Bolt M6x48 16
For replacement parts visit WENPRODUCTS.COM
1. Do not climb, sit or stand on the dolly.
2. Do not exceed the loading capacity.
3. Do not use the dolly if any part is miss-
ing or damaged. Replace damaged parts
immediately.
WARNINGS