Replacement Instructions

8. Remove the four (4) screws holding the plate onto the upper pulley. Refer to Fig. 8 below.
Fig. 8. Remove these four screws.
9. The pulley mechanisms should now be fully exposed, as in Fig. 9 below. Gently work the primary
belt off the upper pulley. Then work the secondary belt off the lower pulley. For a video on how this is
done, please refer to this link: https://youtu.be/Zw2KuknmCZE . CAUTION: be careful to not pinch
yourself.
Fig. 9. Pulleys and belts are now exposed.