MODEL BG4266, BG4260 6-INCH BENCH GRINDER Instruction Manual NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: 1-800-232-1195 (M-F 8AM-5PM CST) TECHSUPPORT@WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance.
CONTENTS WELCOME 3 Introduction...................................................................................................... 3 Specifications.................................................................................................... 3 SAFETY 4 General Safety Rules......................................................................................... 4 Specific Rules for Your Bench Grinder.............................................................. 6 Electrical Information.........
INTRODUCTION Thanks for purchasing the WEN Bench Grinder. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety concerns, as well as helpful assembly and operating instructions for your tool. SAFETY ALERT SYMBOL: Indicates danger, warning, or caution.
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE SAFETY INSTRUCTIONS. WORK AREA SAFETY 6. If operating a power tool in a damp location is 1.
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE SAFETY INSTRUCTIONS. 7.
SPECIFIC RULES FOR YOUR BENCH GRINDER WARNING! Do not operate the power tool until you have read and understood the following instructions and the warning labels. BENCH GRINDER SAFETY protect yourself from hearing loss. 1. This bench grinder is designed for sharpening and honing cutting tools, using the appropriate accessories. 3. DO NOT wear loose clothing or jewelry as they might Using the machine for any other purpose for which it get drawn in by the tool. Tie back long hair.
SPECIFIC RULES FOR YOUR BENCH GRINDER WARNING! Do not operate the power tool until you have read and understood the following instructions and the warning labels. 3. Only grind on the face of the grinding wheel. Do not grind on the side of the wheel. 8. Do not use the bench grinder unless all guards are in place. Do not operate with any guard disabled, damaged, or removed. Moving guards must move freely and close instantly. 4. Keep clear of moving parts.
ELECTRICAL INFORMATION GUIDELINES AND RECOMMENDATIONS FOR EXTENSION CORDS When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. The table below shows the correct size to be used according to cord length and ampere rating. When in doubt, use a heavier cord. The smaller the gauge number, the heavier the cord. REQUIRED GAUGE FOR EXTENSION CORDS AMPERAGE 2.
KNOW YOUR BENCH GRINDER TOOL PURPOSE This bench grinder features two 6-inch grinding wheels for sharpening dull blades, wood chisels, knives, scissors, carving tools, axes and more. Refer to the following diagrams to become familiarized with all the parts and controls of your bench grinder. The components will be referred to later in the manual for assembly and operation instructions. A B I C D E F G A. Locking Knob: Used to adjust the position of the eye shield. B.
ASSEMBLY & ADJUSTMENTS WARNING! Do not plug in or turn on the tool until it is fully assembled according to the instructions. Read through and become familiarized with the following procedures of handling and adjusting your tool. Failure to follow the safety instructions may result in serious personal injury. POSITIONING THE MACHINE Place the machine on a stable, flat work surface. The machine has four rubber feet pre-installed to increase stability and reduce vibration.
ASSEMBLY & ADJUSTMENTS WARNING! Always make sure your bench grinder is securely mounted to a workbench or stand. Failure to do so could result in an accident resulting in possible serious personal injury. MOUNTING YOUR BENCH GRINDER The bench grinder should be firmly attached to a reliable work surface using mounting hardware (not included) through the base of the grinder’s mounting holes. This will prevent the bench grinder from vibration, walking, or tipping during operation. 2.
OPERATION WARNING! Metal pieces become heated quickly during grinding, so make sure to move the workpiece back and forth to prevent overheating. DANGER! FIRE HAZARD. Do not grind or polish magnesium or magnesium alloys. NOTE: Do not apply excessive pressure. Guide the blade with light pressure. Let the grinding wheel do the work.
TROUBLESHOOTING GUIDE PROBLEM Motor overheats. Grinding wheel not rotating smoothly or evenly. Wavy finish on the surface of a workpiece. POSSIBLE CAUSE SOLUTION 1. Motor overloaded. 1. Reduce load on motor – reduce pressure on workpiece. 2. Extension cord too long, or of insufficient gauge. 2. Utilize an extension cord of appropriate gauge and length, or plug tool directly into outlet (see page 8). 1. Wheel is improperly installed. 1.
MAINTENANCE 2. Use a vacuum or low-pressure compressed air to To replace a grinding wheel: remove dust and debris from the tool surfaces, motor 1. Turn OFF and disconnect the bench grinder from the power supply. housing and work area. 3. Wipe the tool surfaces clean with a soft cloth or 2. Use a Phillips-head screwdriver (not included) to loosen the three screws on the grinding wheel cover brush. Make sure water does not get into the tool. and remove it. 4.
EXPLODED VIEW & PARTS LIST 15
EXPLODED VIEW & PARTS LIST 16 No. Part No. Description Qty. No. Part No. Description Qty.
WARRANTY WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship during personal use for a period of two (2) years from date of purchase or 500 hours of use; whichever comes first.
NOTES 18
NOTES 19
THANKS FOR REMEMBERING V. 2021.06.
