MODEL 4282, BG4282 8-INCH BENCH GRINDER WITH LED LIGHTS Instruction Manual NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: 1-800-232-1195 (M-F 8AM-5PM CST) TECHSUPPORT@WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance.
CONTENTS WELCOME 3 Introduction...................................................................................................... 3 Specifications.................................................................................................... 3 SAFETY 4 General Safety Rules......................................................................................... 4 Impact Wrench Safety Warnings....................................................................... 6 Electrical Information........
INTRODUCTION Thanks for purchasing the WEN Bench Grinder. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety concerns, as well as helpful assembly and operating instructions for your tool. Indicates danger, warning, or caution.
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE SAFETY INSTRUCTIONS. WORK AREA SAFETY 1. Keep work area clean and well lit.
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE SAFETY INSTRUCTIONS. 7.
BENCH GRINDER SAFETY WARNINGS WARNING! Do not operate the power tool until you have read and understood the following instructions and the warning labels. BENCH GRINDER SAFETY 1. This bench grinder is designed for sharpening and honing cutting tools, using the appropriate accessories. Using the machine for any other purpose for which it is not designed may result in serious injuries, machine damage and voiding of the warranty. 2.
BENCH GRINDER SAFETY WARNINGS WARNING! Do not operate the power tool until you have read and understood the following instructions and the warning labels. DURING OPERATION (CONT.) 4. Keep clear of moving parts. Keep arms, hands and other vital appendages away from the grinding and honing wheel. Do not reach behind or beneath the rotating wheel. Avoid awkward operation and hand positions. An accident could easily send the operator’s hand into the wheel. 5.
ELECTRICAL INFORMATION GROUNDING INSTRUCTIONS In the event of a malfunction or breakdown, grounding provides the path of least resistance for an electric current and reduces the risk of electric shock. This tool is equipped with an electric cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching outlet that is properly installed and grounded in accordance with ALL local codes and ordinances. 1. Do not modify the plug provided.
UNPACKING & PACKING LIST UNPACKING Carefully remove the bench grinder from the packaging and place it on a sturdy, flat surface. Make sure to take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list below to make sure you have all of the parts and accessories. If any part is missing or broken, please contact customer service at 1-800-232-1195 (M-F 8-5 CST), or email techsupport@wenproducts.com.
KNOW YOUR BENCH GRINDER TOOL PURPOSE Sharpen bits, drill bits, chisels, gouges, and other cutting tools all with your WEN Bench Grinder. Refer to the following diagrams to become familiarized with all the parts and controls of your bench grinder. The components will be referred to later in the manual for assembly and operation instructions.
C - Work rest bracket (left) K - Bracket konb D - Work rest bracket (right) L - Coolant tray E - Philips screw M- Lock washer AW o rk r Best W ( r igh o rk t) Cres t W , g ork roo res D ve t d b Wo rac (lef rk k t) e r Et e (lef s t b P t) hili rac ket ps s ( c - S r rew igh par t) K ASSEMBLY & ADJUSTMENTSN - Flat washer M N M D G - Spark deflector with LED assembly (right) P K F - Spark deflector with LED assembly (left) O - Batteries AAA H - Eye shield P - Flat washer WARNING! Do not con
Fig. 8 Fig. 6 ASSEMBLY & ADJUSTMENTS A INSTALLING THE COOLANT TRAY (FIG. 4) E Place the coolant tray (Fig. 4 - L) over the coolant tray bracket then firmly push tray down onto the bracket to secure it inAplace. H G INSTALLING THE LED BATTERIES (FIG.E5 & 6) 1. The LED light switch is on top of the spark shield assembly. H Make sure that the LED button hasGbeen pushed to the OFF position when installing batteries. 2. Remove the battery covers from the top of the LED assemblies.
OPERATION WARNING! Always wear eye protection with side shields marked toFig. comply with ANSI Z87.1. Failure to do 10 so could result in objects being thrown into your eyes resulting in possible serious injury. A Fig. A USING THE COOLANT TRAY (FIG. 8) Fig. 8 The coolant tray allows you to cool overheated workpieces. Fill the tray half way with water or appropriate coolant before operation. Periodically empty out the coolant tray.
OPERATION Fig. 10 Fig. 13 C A BLADES (FIG. 10) Fig. 13 A g. 10 SHARPENING LAWN MOWER C Fig. 10 Lawn mower blades are usually sharpened on only one edge and dressed up slightly A on the other. Perform this sharpening A process on both cutting ends of the blade. A Fig. 14 A Screwdriver After sharpening, be sure to balance the blade by removing Vise A additional material from the heavy end. Unbalanced blades can cause serious crank shaft damage to your lawn mower.
MAINTENANCE WARNING! For your own safety, turn the switch OFF and remove the plug from the electrical outlet before adjusting or performing maintenance inspection work on the bench grinder. GENERAL CLEANING AND MAINTENANCE 1. Regularly check the tool and use a soft brush to remove accumulated dust. Wear safety goggles to protect your eyes while cleaning. 2. If the body of the grinder needs cleaning, wipe it down with a soft, damp cloth. A mild detergent can be used.
MAINTENANCE Fig. 15 F WheelBCover Grinding E Wheel A HexCNut D Outer Flange Inner Flange G Arbor H Spindle Fig. 13 E - Grinding wheel A - ScrewCHANGING THE GRINDING WHEEL (CONT.) (FIG. 13) 5. guard Replacecover the grinding wheel with a new grinding wheel thatFhas a speed B - Wheel - Flange nutrating higher than 3450 RPM. The outer diamter of the wheel should be 8 inches and the arbor size should be 5/8 of an inch. Do not remove labels from the C - Wheel nut G- Inner flange grinding wheels.
EXPLODED VIEW & PARTS LIST NOTE: Not all parts may be available for purchase. Parts and accessories that wear down over the course of normal use are not covered under the warranty.
EXPLODED VIEW & PARTS LIST No. Part No. Description Qty. No. Part No. Description Qty. 1 4286-001 M5x48 Screw 4 27 4282-027 ɸ5 Toothed locking washer 2 2 4286-003 Left wheel guard cover 1 28 4282-028 M5 Locking nut 2 3 4286-004 M16 I type hex nut 1 29 4286-022 Left movable work rest 1 4 4282-004 Flange 4 30 4286-014 ɸ6 Flat Washer 2 5 4282-005 60# Grinding Wheelɸ200×25×ɸ15.
WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship during personal use for a period of two (2) years used for professional or commercial use.
THANKS FOR REMEMBERING V. 2021.06.
