MODEL DC3402 600 CFM DUST COLLECTOR Instruction Manual NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: 1-800-232-1195 (M-F 8AM-5PM CST) TECHSUPPORT@WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance.
CONTENTS WELCOME 3 Introduction...................................................................................................... 3 Specifications.................................................................................................... 3 SAFETY 4 General Safety Rules......................................................................................... 4 Dust Collector Safety Warnings........................................................................ 6 Electrical Information......
INTRODUCTION Thanks for purchasing the WEN Dust Collector. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety concerns, as well as helpful assembly and operating instructions for your tool. Indicates danger, warning, or caution.
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE SAFETY INSTRUCTIONS. WORK AREA SAFETY 1. Keep work area clean and well lit.
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE SAFETY INSTRUCTIONS. 7.
DUST COLLECTOR SAFETY WARNINGS WARNING! Do not let comfort or familiarity with the product replace strict adherence to product safety rules. Failure to follow the safety instructions may result in serious personal injury. DUST COLLECTOR SAFETY 1. This dust collector is intended only for collecting wood dust and chips from woodworking machines. Do not use dust collector for anything except wood dust.
ELECTRICAL INFORMATION GROUNDING INSTRUCTIONS In the event of a malfunction or breakdown, grounding provides the path of least resistance for an electric current and reduces the risk of electric shock. This tool is equipped with an electric cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching outlet that is properly installed and grounded in accordance with ALL local codes and ordinances. 1. Do not modify the plug provided.
UNPACKING & PACKING LIST UNPACKING With the help of a friend or trustworthy foe, such as one of your in-laws, carefully remove the dust collector from the packaging and place it on a sturdy, flat surface. Make sure to take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list below to make sure you have all of the parts and accessories.
ASSEMBLY & ADJUSTMENTS ASSEMBLING THE ROLLER BASE 1. Place the machine on its back and attach one of the casters (Fig. 2 - 1) with four M5 bolts (Fig. 2 - 2) and washers (Fig. 2 3). Secure the bolts with four nuts (Fig. 2 - 4) on the underside. 2 3 Fig. 2 2. Repeat step one for the remaining three casters. 1 ASSEMBLING THE OUTLET 1. Stand the machine upright on the roller base. 4 2. Insert two M6 bolts (Fig. 3 - 1) into the top two holes of the square outlet and place the rubber gasket (Fig.
ASSEMBLY & ADJUSTMENTS MOUNTING DIMENSIONS 6.7 in (170mm) 2 in (50mm) OPERATION WARNING! This dust collector is intended only for collecting wood dust and chips from woodworking machines. Do not use dust collector for anything except wood dust. Material such as liquids, aerosols, metal dust, screws, glass, plastic or rock can cause sparks when coming into contact with any part of the collection system. WARNING! Never allow steel to come into contact with impeller.
OPERATION TIPS AND TRICKS 1. Your dust collector is designed to collect sawdust and other fine particles, such as that produced by sanders, band saws, etc. If you plan to use it with a machine that produces larger chips or shavings, such as a thickness planer or jointer, we recommend using a cyclone separator or similar filter upstream of the dust collector, to prevent clogging. 2. When turning the dust collector on or off, you may hear a clicking sound as the motor spins up or down.
TROUBLESHOOTING GUIDE WARNING! Stop using the tool immediately if any of the following problems occur. Repairs and replacements should only be performed by an authorized technician. For any questions, please contact our customer service at 1-(800) 232-1195, M-F 8-5 CST or email us at techsupport@wenproducts.com. PROBLEM CAUSE 1. Unit is not plugged in. 2. Wrong extension cord size. Unit does not start. Unit hums but does not start. 3. Onboard circuit breaker tripped. SOLUTION 1. Plug unit in. 2.
EXPLODED VIEW & PARTS LIST NOTE: Not all parts may be available for purchase. Parts and accessories that wear down over the course of normal use are not covered under the warranty.
EXPLODED VIEW & PARTS LIST No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Part No. DC3402-001 Description Caster Lock Nut, M5 Pan Head Screw, M5x10 Washer, 5mm Base Plate Pan Head Screw, M5x8 Inlet Cover Socket Head Cap Screw, M6x20 Pan Head Screw, M5x8 Washer Impeller Collector Body Washer, 8mm Nut, M8 Lock Washer, 8mm Hex Head Screw, M8x12 Hex Head Screw, M8x16 Hex Head Screw, M6x20 Nut, M6 Washer, 6mm Qty. 4 16 16 16 1 12 1 1 1 1 1 1 10 4 14 6 4 6 6 6 No. 21 22 23 24 Part No.
WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship during personal use for a period of two (2) years used for professional or commercial use.
THANKS FOR REMEMBERING V. 2020.12.
