SDS

Hangzhou Wanma High-energy Battery Co., Ltd
Add:No.118, Linban Road,GongShu Hangzhou, China Postalcode:310022
TEL: [phone] 88368926 FAX: [phone]
Engineering Controls: General room ventilation is sufficient during normal use and handing. Do not
install these batteries in sealed, unventilated areas. Facilities storing or utilizing this material should
be equipped with an eyewash facility and a safety shower.
Work/Hygienic Practices: Remove jewelry, rings, watches and any other metallic objects while
working on battery. All tools should insulate to avoid the possibility of shorting connections. DO NOT
lay tools on top of the battery. The work area should be equipped with the corresponding species and
quantity of fire equipment and leakage emergency equipment.
Personal Protective Equipment:
Eyes: Under normal condition of use and handing no special protection is required for sealed
Battery.
Skin: Under normal condition of use and handing no special protection is required for sealed
Battery.
Clothing: Under normal condition of use and handing no special protection is required for sealed
Battery.
Respirators: Under normal condition of use and handing no special protection is required for sealed
Battery. Use appropriate respirator if airborne dust or mist concentrations exceed.
Personal Protective Equipment：Under normal condition of use and handing no special protection is
required for sealed Battery.
(In the Event of Battery Case Breakage): Always wear appropriate safety glasses with side shields or
full face shield. Use appropriate gloves. Wear appropriate boots, apron or clothing. Use appropriate
respirator.
Other Protection: No smoking or eating scene work. To maintain good health habits. Wash hands
thoroughly after working and before eating.
9. PHYSICAL & CHEMICAL PROPERTIES
Appearance and character
：
solid
，
in plastics case
Color
：
Different color as design
Odor: no
Solubility: Insoluble in water.
Decomposition temperature: N/A
Voltage
：
12V
Weight
：
0.5Kg
capacity
：
1.6Ah
function
：
Engine start
10. STABILITY &REACTIVITY
Chemical Stability: Stable under temperatures and pressures.
Possibility of hazardous reactions: When a battery cell is exposed to an external short-circuit,
crushed, modification, high temperature, open flames, it will be the cause of heat generation and
ignition.
Conditions to Avoid: Exposed to an external short-circuit, prolonged overcharge, crushed,
modification, high temperature, open flames, incompatible materials, direct sunlight and high
humidity.
Incompatibilities with Other Materials: Conductive materials, water, seawater, strong oxidizers
and acids.
Hazardous Decomposition Products: Thermal decomposition may produce hazardous fumes of
metal oxides, harmful gas and etc.
Hazardous Polymerization: Will not occur.
4