Use and Care Manual

PARALLEL KIT SAFETY WARNINGS
PARALLEL KIT SAFETY
1. DO NOT operate in rain, wet or damp conditions,
or with wet hands. The operator may suffer severe
electric shock if the generator is wet.
2. If at any point the parallel connection kit becomes
wet, wipe and dry the kit well before operation. Do
not pour water on the parallel connection kit or use
water to clean the kit.
3. Pay attention to extension cords and all wiring
attached to the parallel kit. If any wires are under the
generator or in contact with a vibrating part, it may
break, causing a generator burnout and electric shock
hazard. Properly replace damaged cords immediately.
4. Follow all necessary electrical grounding proce-
dures for the parallel kit, connected generators, and
related equipment. The parallel kit is designed to be
grounded to provide a path of least resistance for the
electric current, reducing the risk of electric shock in
the event of a failure or breakdown. Failure to correctly
ground equipment can cause serious injury or death.
5. DO NOT connect or disconnect parallel kit wires
while the generator is running. Only turn on genera-
tors once the parallel kit wires have been properly
connected.
WARNING! Do not let comfort or familiarity with the product replace strict adherence to product safety rules.
Failure to follow the safety instructions may result in serious personal injury.
6