Use and Care Manual

7
OPERATION
CONNECTING TWO INVERTER GENERATORS
1. Place your parallel kit on a dry surface, such as dry ground or the top
of your generator.
2. The parallel kit has two sets of wires. Securely connect each set of
wires to each generator’s control panel. (Fig. 1)
• Insert the red plug into the red parallel connection port and the
black plug into the black port of each generator. If the wires are not
connected correctly, the generators will not output any power.
3. Attach the green wire with metal ring to each generators’s grounding
nut.
NOTE: Failure to properly ground the generator or parallel kit can in-
crease your risk of electric shock.
4. Once all the wires are correctly connected, start the inverter gen-
erators one at a time, according to the instructions included with your
generator. The generator that has been started first will be the primary
generator.
Allow the generators to run for several minutes to stabilize speed and
output before plugging in your electrical device(s).
NOTE: The total rated power of your parallel kit is 6000W (50A). Do not
overload the receptacles.
NOTE: The maximum voltage you can pull from the 14-50R outlet is
120V, you cannot pull 240V from it.
Fig. 1
Wires
Parallel
Connection Port on
Generator Panel
WARNING! If the parallel kit is
placed on the ground, be careful not
to accidentally trample the wires.
WARNING! Make sure both gen-
erators are OFF and all electronic de-
vices are unplugged from the genera-
tor and parallel connection kit before
plugging in your kit to the generators.
STORAGE
When the parallel kit is not in use, disconnect the kit from the inverters. Bind the cords around the parallel kit body.
Place the parallel kit back into its packaging for storage. Store in a well-ventilated, dry area.
If parallel kit is to be left with the inverter, bind the cords together so as to prevent trampling of the plugs and cords.
DISPOSAL
When the product reaches the end of its lifetime, please do not dispose of parts with your household waste. This
product contains components that should be recycled. Please take this product to your local recycling facility for
responsible disposal to minimize its environmental impact.