Users Manual

5
/
8
Integration instructions
Integration instructions for host product manufacturers according to KDB
996369 D03 OEM Manual v01
2.2 List of applicable FCC rules
FCC Part 15 Subpart C 15.247 & 15.207 & 15.209
2.3 Specific operational use conditions
The module is a module with LoRa functions.
- Operation Frequency: 902-928MHz
- Number of Channel: 1
- Modulation: FSK/GFSK/MSK/GMSK/LoRa/OOK
- Type: Helical Spring Antenna
- Gain: 0 dBi Max.
The module can be used for mobile or portable applications with a maximum
0dBi antenna. The host manufacturer installing this module into their product must
ensure that the final composit product complies with the FCC requirements by a
technical assessment or evaluation to the FCC rules, including the transmitter
operaition. The host manufacturer has to be aware not to provide information to
the end user regarding how to install or remove this RF module in the user's manual
of the end product which integrates this module. The end user manual shall include
all requiredregulatory information/warning as show in this manual.
2.4 Limited module procedures
Applicable. The module is a Limited Single module and co
mplies with the requirement
of FCC Part 15.212.
The product is a limited module. Since there is no shieldin
g shell, no permanently attached atenna and does not
contain an independent power supply adjustment, C2PC or New
FCC ID
certification procedures are required when the module is plac
ed in the host device.