Instruction Manual
Table of Contents Crafted for Life. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Watch Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 General Features and Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Operating Instructions (all features not available on all watches) Standard Three-Hand Watches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Automatic Watches . . . .
Crafted For Life Delémont, Switzerland 1893 Over a century ago, Wenger built a factory in this tiny Swiss village and transformed it into production headquarters for the Genuine Swiss Army Knife™ still used by the Swiss Army today. As it was 100 years ago, each tool, implement and knife manufactured by Wenger is crafted by hand in solid stainless steel and each individually inspected for quality and craftsmanship. This same attention to detail has been applied to genuine Wenger watches.
Wenger Watch Components Movements – Swiss quartz movements or 25-Jewel Swiss Automatic movement. Case Body – All stainless steel or titanium for quality and durability. Water-Resistant – To 50m (165') or 100m (330') for standard watches. To 200m (660') or 1000m (3300') for dive watches. Straps/Bracelets – Stainless steel and titanium bracelets feature dive buckles or deployant jewelry buckles.
General Features and Components Hour, minute and second hands Bracelet or strap Crown protector Military time Case 4 Crown (used to set date and time) Bezel ring
Optional Features • Rotating bezel measures elapsed time • Tachymeter measures speed over a known distance • Date display window (may offer magnified display window or dual numeral “Big Date” window) • Day of the week display window • Screw-down crown for added water resistance • Dual time zone option to track time in two known time zones • Alarm • Swing-out compass • Military time features printed 24-hour indicators • Push-button release clasp • Mother-of-Pearl dial • Automatic watches – these are wound an
Position 1 Position 2 Position 3 Setting the Time and Date on Standard Watches (see Table of Contents on p.1 for other watches) Important note: If the crown of your watch does not pull directly out or if your watch is water-resistant to 200m, then you may have a watch with a screw-down crown. Rotate the crown counterclockwise until the crown moves away from the watch. This will set the crown in Position 1. Always screw down the crown after making any adjustments.
1. Pull out the crown to Position 2 (one “click” out). Rotate crown counterclockwise until the date shows one day earlier than the date you want to set. 2. Pull out the crown to Position 3 (two “clicks” out). Rotate crown so the watch hands move clockwise until the current date shows. Then set the watch hands to the correct time. Turn the watch hands past 12 once if you’re setting the watch for a P.M. time. Push the crown back to Position 1. 3.
Position 1 Position 2 Position 3 Setting the Time and Date on Automatic Watches (see Table of Contents on p.1 for other watches) 1. Pull out the crown to Position 2 (one “click” out). Rotate crown clockwise until the date shows one day earlier than the date you want to set. 2. Pull out the crown to Position 3 (two “clicks” out). Rotate crown so the watch hands move clockwise until the current date shows. Then set the watch hands to the correct time.
3. For a watch with day and date display, pull out the crown of the watch to Position 2, turn it clockwise to change the day and counterclockwise to change the date. 4. Return the crown to the fully depressed Position 1, assuring the crown has been further screwed down on all 200m watches. Stopped Automatic Watches If the watch is not worn it will wind down and stop. We suggest the following procedure to start an automatic watch which has stopped.
Day and Date Dual Sub-Dial Watch Bracelet or strap 4 1 2 16 3•25•2 U TH FRI 22 21 SAT SUN 1•2 17•19•2 •5• 6 2 •11•13 19 9• 1•3•5 15 WED 20 7 7 •2 9 •7• UE 8 T 14 1 11 10 MON Bezel ring Crown, crown positions 13 23 Day sub-dial 5 17 Date sub-dial 18 Left inset pusher* 10 Right inset pusher*
Setting the Time and Date of Dual Sub-dial Watches Set the Time 1. Pull out crown to position 2. 2. Rotate crown clockwise to set the time. 3. Return crown to position 1. Set the Date 1. Pull out crown to position 2. 2. Set time to 6:00 by rotating the crown. 3. Use left inset pusher* to set current day. 4. Use right inset pusher* to set current date. 5. Rotate crown counter-clockwise to set current time. Turn the watch hands past 12 once if you’re setting the watch for a P.M. time. 6.
2nd Time Zone Dual Sub-Dial Watch Bracelet or strap Hour hand Minute hand 60 05 55 1 50 11 10 2nd Time zone minute hand 5 7 35 30 45 12 Second hand 25 Date 07 20 40 8 6 2nd Time zone hour hand Crown 3 4 60 45 15 30 3 15 9 2 12 2nd Time zone pusher
Setting the Time and Date of 2nd Time Zone Dual Sub-Dial Watches Setting the Primary Date and Time (Large minute and hour hands) See pages 6-7 for complete instructions. Setting the 2nd Time Zone 1. Depress the 2nd time zone pusher for at least 2 seconds and release. The minute hand will automatically advance one minute. 2. Depress the pusher again and hold it down to advance the minute and hour hands. The longer the pusher is depressed, the faster the time will advance. 3.
Operating Instructions for Swing-Out Compass Watch Setting the Date 1. Pull out the crown to Position 2 (one “click” out). Rotate crown counterclockwise until the date shows one day earlier than the date you want to set. 2. Pull out the crown to Position 3 (two “clicks” out). Rotate crown so the watch hands move clockwise until the current date shows. Then set the watch hands to the correct time. Turn the watch hands past 12 once if you’re setting the watch for a P.M. time. 3.
Operating the Compass 1. Swing-out side of case to reveal compass. 2. Lay the compass on a flat surface for best results. 3. Your compass will adjust to accurately reflect orientation within 30 seconds, the arrow may undergo some movement during this period. Once still, the red arrow will be pointing North. 4. Your compass now accurately reflects your orientation.
Dual Time Zone Feature (2nd Time Zone Dual Sub-Dial, see page 12) Note: The second time zone is read in military time (1:00 p.m. = “13”, 2:00 p.m. = “14”, etc.). The military time hours appear either on the dial, or on some models, on the bezel of the watch. 1. Begin by setting the regular time by following the instructions on pages 6 and 7. 2.
Watch with Alarm 1. Begin by setting the regular time by following the instructions on pages 6 and 7. 2. Pull crown out to Position 2. 3. Rotate crown clockwise to set alarm hand (indicated in red) at desired alarm time. 4. Pull out alarm button (located at either 2 o’clock or 11 o’clock) to set alarm. You will hear a brief signal acknowledging that the alarm is set. 5. Return crown (not the alarm button) to Position 1. Alarm will sound when hour hand passes alarm hand.
Additional Features (All features may not be available on all models) Rotating Bezel This feature enables you to track elapsed time. 1. Turn the bezel counterclockwise until the zero indicator (60) is at the minute hand. 2. The position of the minute hand in relation to the zero indicator on the bezel will indicate the total number of minutes elapsed. Deployant (Jewelry) Clasp Deployant closures are used to assure a secure fit of your watch and easy opening and closing.
Deployant Buckles on Bracelets Deployant buckles on bracelets are generally double deployant, or two-sided to hide the buckle and give the bracelet a seamless appearance. 1. Have the watch fitted by a professional jeweler and the appropriate links removed. 2. Gently pull on either side of the clasp to open, or press down to close. Caring for Your Watch Even though your watch is water-resistant, it is not recommended that you wear it in a hot shower, sauna or hot tub.
3-Year Limited Warranty Wenger is proud to stand by our quality Swiss craftsmanship with a 3-Year Limited Warranty. This Wenger watch is warranted to the original consumer/ purchaser against breakage or malfunction under normal use due to defects in material or workmanship. This 3-Year Limited Warranty also includes all components and craftsmanship of the Swiss movement and watch case. We will repair, or at our option, replace any defective Wenger watch with the same or comparable model.
Warranty Service In the United States, please send your watch to: WWRC, 15 Corporate Drive, Orangeburg, NY 10962. Please include a check or money order payable to Wenger NA in the amount of $10(US) to cover the cost of return shipping and handling (California residents exempt). If your warranty has been rendered void as a result of non-compliance with above warranty restrictions, we will send you an estimate before any repairs are made. When sending your watch to our Service Center, please pack it securely.
Wenger Watch Registration For your convenience you can register online at www.WengerNA.com/warranty or complete the form below and mail it to the address on the back.
Notes: _____________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ _____________________________
Notes: __________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ________________________________
04/08 Wenger N.A. 15 Corporate Drive · Orangeburg, NY · 10962 · USA Tel: 800-431-2996, 845-365-3500 Fax: 845-425-4700 (General correspondence) 845-365-3743 (Orders only) Web: www.WengerNA.