Datasheet

Page 3/7
Safety Data Sheet
according to 1907/2006/EC, Article 31
Printing date 16.11.2009 Revision: 16.11.2009
Trade name: teslanol PR Druckkopf-Reiniger Spray 200 ml (Art. 26040)
(Contd. of page 2)
DR
Open and handle receptacle with care.
·
Information about fire - and explosion protection:
Keep ignition sources away - Do not smoke.
Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C, i.e. electric
lights. Do not pierce or burn, even after use.
Do not spray onto a naked flame or any incandescent material.
·
Storage:
·
Requirements to be met by storerooms and receptacles:
Store in a cool location.
Observe official regulations on storing packagings with pressurized containers.
·
Information about storage in one common storage facility:
Store away from oxidizing agents.
·
Further information about storage conditions:
Store in cool, dry conditions in well sealed receptacles.
Protect from heat and direct sunlight.
·
Recommended storage temperature:
15 - 35°C, max. 50°C
8 Exposure controls/personal protection
·
Additional information about design of technical facilities:
No further data; see item 7.
·
Ingredients with limit values that require monitoring at the workplace:
106-97-8 butane
WEL Short-term value: 1810 mg/m³, 750 ppm
Long-term value: 1450 mg/m³, 600 ppm
Carc (if more than 0.1% of buta-1.3-diene)
67-63-0 propan-2-ol
WEL Short-term value: 1250 mg/m³, 500 ppm
Long-term value: 999 mg/m³, 400 ppm
110-54-3 n-hexane
WEL Long-term value: 72 mg/m³, 20 ppm
·
Additional information:
The lists valid during the making were used as basis.
·
Personal protective equipment:
·
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Do not inhale gases / fumes / aerosols.
Avoid contact with the eyes and skin.
·
Respiratory protection:
Not necessary if room is well-ventilated.
Use suitable respiratory protective device in case of insufficient ventilation.
·
Protection of hands:
·
Material of gloves
If contamination is possible, use gloves made of nitrile according EN 374
·
Penetration time of glove material
> 480 min / 0,4 mm thickness
·
Eye protection:
Safety glasses in case of spittings
9 Physical and chemical properties
·
General Information
Form:
Aerosol
Colour:
Colourless
Odour:
Characteristic
(Contd. on page 4)
GB