User`s manual

User’s manual CAB EASYFLEX S-Slim L and XL
Page 3 / 7
3 Scope of Delivery and Parts list
User’s manual
4 Safety Instructions
ATTENTION! Only trained professionals are authorized to inspect the wall, as well as install and remove
the product! Among others, there is a risk of electric shock, bruises, and crashes!
Your product is not a toy and is not meant for children, because it contains small parts which can be swallowed and can
injure when used inappropriately!
NEVER place the display screen on its front side during installation, lean the display screen against a wall or a sturdy
surface. Placing the display screen on its front side could cause permanent damage!
Install the system and devices attached to it in a way that persons cannot be injured, or objects not be damaged for example
by dropping.
Remove the packing materials, because children may cut themselves on them while playing. Furthermore, there is a risk of
swallowing and inhalation of incidentals and insulating material.
We recommend that the wall installation only be performed by qualified technicians.
To avoid accidents it is necessary to check the wall structure before installation, or to carefully look for a safe place for
installation. Look out for live cables embedded in the wall!
The wall must be strong enough at the place of installation to carry at least the fourfold of the total weight of the product, the
audio / video devices, the bracket, and the installation material.
The place of installation must be able to withstand earthquakes, or other strong vibrations.
Avoid places with high temperatures, or humidity, or places which might come into contact with water.
Do not install the product close to openings of air conditioners, or at places with an excessive amount of dust or smoke.
Install it only on a vertical wall. Avoid slant surfaces, because other kind of tensile stress may then interact with the material.
Do not install the product at places subject to vibration, or oscillation.
Do not modify and alter any accessories! Make sure you also read the Chapter “Warranty and Liability”. Do not use any
damaged parts.
Tighten all screws. Do not use too much force to avoid breakage of screws and over-turning of threads.