User`s manual

21
Risk of material damage by inappropriate ambi-
ent conditions
>>
>>
>>
Keep enough space around product and to the whole
system to ensure proper ventilation and mobility.
Mountonlytosufcientlythickandstablesurfaces.
Protect against pressure points.
Ta b . 1 5 : Wall mounting
Allen key 4mm
with screwdriver
P-A
Allen key 5mm
P-B
4.2.1 Pre-assembly
1. Check the strength and stability of the
surface before installing and do not
damage them.
2. Choose a suitable mounting place.
3. Screw the rod unit (B) clockwise into
the desk clamp (C).
      4. Subsequentlyxitbythighteningthe
       AllenscrewswithAllenkey(P-A),like
shown.
      5. Adjusttheheightofthestopring(S),
       thattheatscreensdonotputonthe
surface.
Fi g. 14: Desk Mounting - pre-assembly 1
6. Clip the cover caps (D) on the right
and left side of the holder unit (A).
Fi g. 15 : Desk Mounting - pre-assembly 3
4.2.2 Table edge mounting
Thighten the desk clamp (C) clockwi-
se by hand.
Fig . 16: Desk mounting - Table edge mounting