User`s manual

User‘s Manual

4.2.3 Alternative through desk mounting

   1. Removetherubberprotectorsatthe

desk clamps (C) inside.

      2. Removethe3AllenscrewsbyAllen

key (P-B) anti-clockwise out of the

desk clamp (C).

3. Turn the screw of the counter plate

off the desk clamp (C) by Phillips

screwdriver.

Fi g . 17: Desk mounting - Alternative through desk mounting 1

P-D

4. Install the pressure plate (P-D)

instead the desk clamp (C) to the

bottom side of the stand.

5. Glue the rubber protectors back on.

Fig . 18: Desk mounting - Alternative through desk mounting 2

6. Place the stand above the installation

hole and slide the thread rod through

the pressure plate (P-D).

7. Tighten the thread rod clockwise by

hand.

Fig. 19: Desk mounting - Alternative through desk mounting 3