User`s manual

23
4.3 Flat screen mounting
Risk of injury by tripping and falling
>> Place,transportandinstallproduct,partsandacceo-
ries in a safe way.
Risk of material damage by improper
procedure
>> Only use moderate force when tightening the screws
in order to avoid damaging threads.
>>
>>
NEVERsetthescreenonthefrontduringinstallation!
Donotdamagetheatscreenbytoolongscrews.
Ta b . 1 6 : Mounting the at screen
Allen key 4mm
with screwdriver
P-A
Phillips screwdriver
   1. Leantheatscreenverticallyona
   soft,largesurfaceorawalland
protect it of scratches and overturn-
ing.
A
2. Dismantle the VESA plates off the
holder unit (A) by removing the
locking screws on the back side with
Allen key (P-A).
Installation is only possible with at-back at
screens.
Fig. 20: Flat screen mounting 1
3. Attach the VESA plates with
       retaininglugsupwardstoyourat
screens by screws (M-A) or (M-B)
and washers (M-C).
Therefore, the VESA hole spacings
75x75mm or 100x100mm are available.
Fi g . 21: Flat screen mounting 2