User`s manual

12
User‘s manual
5 Connection, Implementing and Operation
5.1 Preparation
To set the audio output caliber, read the User‘s manual of the source device.
1. Check the audio format of the movie or of the TV signals. (stereo or Dolby
™
Digital 5.1, 7.1 etc.)
2. Adjust the audio format of the source device (e.g. uncompressed PCM- or digital Dolby
signals (Dolby 5.1, 7.1))
3. Choose the output of the respective audio format and the language by using the main
menu.
• If the output devices do not support the adjusted audio format (HDTV, Receiver or
speaker system), you will hear noise or no tone at all. In doubt make sure of having
connected all components correctly.
• In case of using a home cinema system or another speaker system, we recommend to
mute the speaker of your HD TV.
• The Ultra HDMI Matrix 4 x 2 comes with a mode, named “highest common accordance“.
By using the Ultra HDMI Matrix 4 x 2 in splitter mode, the source device with the lowest
standard will be automatically adjusted as primal device.
• We recommend choosing the same high resolution, color depth and audio format of the
source device and output device.
5.2 Connection
1. Connect the included power supply with the DC socket of the Ultra HDMI Matrix 4 x 2.
2. Connect the outputs of the source devices to the inputs of the Ultra HDMI Matrix 4 x 2 by
HDMI
TM
cable.
3. Connect the inputs of the HD output devices to the outputs of the Ultra HDMI Matrix 4 x 2
by HDMI
TM
cable.
4. After connecting all cables, the Active A LED (or Active B LED) ashes red for the
outputs and the channel LEDs ashes green for the inputs.
5. Alternatively or additionally, you can connect audio output devices also on TOSLINK
output (digital) or RCA output to connect (analog). These are always active.
5.3 Operation
5.3.1 Ultra HDMI Matrix 4 x 2 Matrix
In Matrix mode you can choose one source device per output device.
Matrix
1 2 3 4
2 3
Splitter
1 2 3 4
3 3
In Splitter mode you can transmit the signal of one source device to both output devices.