User's Manual

key for 4 seconds to confrim setting. When complete setting, and exchange their position.
The other tire exchange method is the same way.
Reset
When receiver host is working, hold on M key to enter pressure setting interface, click M key for 15
times to interface. (As shown below). Click forward key or back key, now shows on the
position of back-left icon. Click again M key to confirm and save, back to main manu. After these setting,
all data will be reset to initial state.
Sensor low battery alarm
When the receiver host detects a tire sensor battery is going to ran out, the sensor battery icon, the
location of the tire icon, and the alarm icon " / / are all flashing at the same time.Receiver
host will give out" Di,Di,Di ... "alarm warning, Indicates that the sensor is in low battery. (As shown
below)
Receiver host parameter settings
1. Function Set Unit Table
Item
Icon/Unit
Remark
1
/
Chinese Identify units/Other countries Identify unit
2
/
Degree Celsius /Fahrenheit Identify unit
3
Thermometer Tire temperature is too high dentify units
4
Tire sensor battery unit
5
Solar Identify unit
6
Receiver host polymer lithium battery unit
7
Data receiving unit
8
Alarm warning unit
Your Attention
When you select each setting, if you do not choose the next item in 15 seconds, it will return to
the main interface.
Before setting please read this manual carefully to avoid errors.