User's Manual

During in the course of driving, if the tire nail leak, pressure is too high or too low, the temperature is too
high, the battery is low, the icon will be light on and machine will give out alarm.
3. Complete TPMS installation, a tire does not display data information?
A. Car can only receive tire pressure sensor data in driving.
B. Check whether the distance between the receiver host and the tire pressure receiver is within a
reasonable range. If the distance is reasonable, please re-pair.
C. The above method can not solve the problem, please contact customer service center.
4. When receiver host turn no, why tire pressure data is not show on the display at once?
In order to reduce power consumption and extend the service life of the sensor, the sensor will not
transmit the signal at the time of car parking and the tire pressure is not abnormal. At this point we need
to start the can, the speed is faster than 20KM / H and exercise a distance, the sensor will goes into
timing launch mode, to transferred real-time update data so that receiver host will show on the display.
Reminder
1. Please use this product correctly and use it within its permitted range.
2. The installation process should be strictly in accordance with the contents of this manual operation,
be sure to have experienced tires to install technicians to disassemble, if due to improper installation
and bring undesirable problems, the Company will not be responsible for any problem.
3. When you need to dismantle the tire, please pay attention to tire pressure sensor, to avoid any
damage caused.
4. In the set threshold, to strictly comply with the scope of the threshold, different models should be in
accordance with its tire parameters or instructions. Sales agents set the range and parameters already,
which we do not need to modify.
5. Please check battery capacity daily. It is special require to do check before your driving.
Important statement
1. This product is the car tire pressure, temperature monitoring of the electronic device, in the above
conditions can remind the driver to take timely measures to eliminate hidden dangers, but can not
ignore the tire itself should be good at any time requirements. Driver should check the following
conditions in accordance with the requirements of user manual: whether the tire pattern has reached
the limit of wear, whether the tire has no abrasion, unilateral wear, fracture, crack, perforation and other
defects. By the tire itself, the existence of the above-mentioned defects, resulting in tire burst accident,
does not belong to the product quality responsibility. This product can alert the driver of the risk of
puncture, but not able to avoid the occurrence of puncture (Please pay attention to working principle of
TPMS products).
2. The product shows tire pressure and temperature data,which is for reference only and warning, and
not able to prevent the occurrence from car traffic accidents.
3. During the cause of driving, please do not operate receiver host button frequently or often focus on
the display, so as not to distract attention. When TPMS give out alarm, driver should immediately slow
down or stop the car for full check untill you make sure all tires are ok before you come back to the your
drive.