Submittal Sheet

932 S/6 Screwdriver set Kraftform Wera: Chiseldriver and rack, 6 pieces

Kraftform Plus – Series 900

EAN: 4013288134479 Size: 285x205x55 mm

Part number: 05018283001 Weight: 915 g

Article number: 932 S/6 Country of origin: CZ

Customs tariff

number:

82054000

Chiseldriver for fastening, chiselling and loosening

For both slotted and Phillips screws

Hexagonal blade extending through the handle

Impact cap with integrated square and bolster for the transfer of higher torque

Storage rack for wall-mounting

Wera Chiseldriver for fastening, chiselling and loosening seized screws. Multi-component Kraftform handle for fast and low-fatigue

working.

Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. A hexagon blade out of

high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. The ductile

tempered material prevents the blade from splintering or breaking. Comes with an impact cap for enhanced service life and reduced risk

of splintering. More torque can be transferred with the help of an open-end or ring spanner applied to the integrated hexagonal bolster.

In some cases equipped with a square take-up in the impact cap that enables higher torque transfer when screwdriving with the T-

handle, Zyklop ratchet or Mini ratchet. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip,

enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.

Web link

https://products.wera.de/en/screwdrivers_kraftform_plus__series_900_932_s_6.html

Wera - 932 S/6

05018283001 - 4013288134479

Wera Werkzeuge GmbH

Korzerter Straße 21-25

D-42349 Wuppertal

Tel: +49 (0)2 02 / 40 45-0

E-Mail: info@wera.de 09.07.2021 - 1 / 2

PAGE 1
932 S/6 Screwdriver set Kraftform Wera: Chiseldriver and rack, 6 pieces Kraftform Plus – Series 900 EAN: 4013288134479 Size: 285x205x55 mm Part number: 05018283001 Weight: 915 g Article number: 932 S/6 Country of origin: CZ Customs tariff number: 82054000 Chiseldriver for fastening, chiselling and loosening For both slotted and Phillips screws Hexagonal blade extending through the handle Impact cap with integrated square and bolster for the transfer of higher torque Storage rack for wall-moun
PAGE 2
932 S/6 Screwdriver set Kraftform Wera: Chiseldriver and rack, 6 pieces Kraftform Plus – Series 900 Set contents: 917 SPHS 05017040001 05017041001 1 x PH 1 x 90 mm 1 x PH 2 x 113 mm 932 AS 05018300001 05018301001 05018302001 1 x 0.8 x 4.5 x 100 mm 1 x 1 x 5.5 x 113 mm 1 x 1.2 x 7 x 138 mm 932 A 050182600011) 1 x 0.6 x 3.