Datasheet

367 Screwdriver for TORX® screws, TX 10 x 80 mm
Kraftform Plus – Series 300
Kraftform Rapid hand repositioning Large contact area
Kraftform Plus screwdrivers –
ergonomics you can grasp. They
relieve the entire hand-arm system
even when used intensively. Along
with other technical and product
advantages such as the Lasertip
for a secure fit in the screw head,
Kraftform screwdrivers are the
ideal choice whenever manual
screwdriving jobs are concerned.
The basic idea for the prototype of
the Kraftform handle – that the
hand should dictate the design –
has, right through to today, proved
to be correct. In cooperation with
the internationally recognised
Fraunhofer IAO Institute, Wera
developed a screwdriver handle
designed to match the shape of
the human hand as long ago as
the 1960s. After a long
development phase, the Wera
Kraftform handle was launched to
the market in 1968. It has been
optimised through the years with
new technologies, but has kept its
proven shape. After all, the human
hand has not changed either.
The hard materials used for the
handle ensure rapid hand
repositioning without any danger of
the skin “sticking" to the handle.
The surrounding hard zones with
large diameters glide like wheels
across the hand.
The large contact area – with
particularly high friction to the soft
zones – results in high torque
transfer without any bruising from
the edges.
Non-roll feature Identification marking Wera Black Point tip
The hexagonal non-roll feature
prevents any rolling away at the
workplace.
The screw symbol and tip size
identification markings on the
handle make it easier to find the
right screwdriver in the tool case,
or at the workplace.
The Wera Black Point tip and a
refined hardening process ensure
long service life of the tip,
improved corrosion protection and
an exact fit.
Web link
https://products.wera.de/en/screwdrivers_kraftform_plus__series_300_367_torx.html
Wera - 367 TORX®
05028005001 - 4013288004222
Wera Werkzeuge GmbH
Korzerter Straße 21-25
D-42349 Wuppertal
Tel: +49 (0)2 02 / 40 45-0
E-Mail: [e-mail] 17.01.2020 - 2 / 3