User's Manual

6 – 3
Description of the read-write heads
D101583 0207 BL ident
6
Function principle
The BLident read-write heads (transceivers) are used for non-
contact data exchange with the corresponding data carriers (TAGs).
They form the so-called air-interface (transfer window), whose size
varies depending on the combination of data carrier and transceiver.
In this air-interface the data carrier is supplied with energy and the
exchange of data is also implemented. The operating frequency is
13.56 MHz.
The achievable distances vary depending on the sizes from 15…200
mm. The read-write heads consist of electronics and an antenna.
(Figure 1)
Read-write head electronics
The electronics ensure the communication between the data carrier,
the read-write head and the BLident interface module.
Figure 1
Block diagram
Read-write head
Modulator
Demodulator
Generator