Use and Care Manual

3
REACH HEIGHTS
POSITIONS
*Assumes a 5ft 7in person with a 12in vertical reach.
**Check applicable state and local codes for specic requirements
TERMINOLOGY
18ft MODEL
hinge lever
inner ladder
section
outer ladder
section
spring loaded
"J" lock
ladder top
The following chart shows the working heights of each of
the available units in each of the six main positions.
The following chart shows the number of available positions for
each of the available units in each of the six main positions.
Spend time to look at the gure below. Become familiar with names used to describe parts
of the Telescoping Multiladder. They will be used throughout this manual.
16ft MODEL 18ft MODEL
Step*
11ft 4 in 12ft 3in
Extension*
16ft 1in 18ft
Stair*
11ft 4 in 12ft 3in
Leaning*
11ft 4in 12ft 3in
Wall*
10ft 10in 11ft 9in
Scaffold*
8ft 7in 9ft 6in
16ft MODEL 18ft MODEL
Step
3 4
Extension
6 7
Stair
3 4
Leaning
3 4
Wall
2 2
Scaffold
2 3
TOTAL 20* 25*
*Includes one additional "CLOSED" Position
outer foot