Brochure

30
WALK IT DOWN
All ladders should be thoroughly inspected from
top to bottom before every use. Ladders can be
damaged while in transit or storage, and through
misuse and abuse.
Examine the ladders carefully for damaged or
missing parts. Never use a bent or damaged
ladder or one that has been exposed to excessive
heat or acid.
USE THE
LADDER INSPECTION FORMS
AT THE END OF THIS GUIDE
EVERY TIME
YOU INSPECT A LADDER!
LADDER INSPECTION
LAY IT DOWN
• Check the rails - not cracked, split or frayed
• Check the rungs – make sure they are not
cracked, bent or missing
• Make sure the feet pads are not missing
LIFT IT UP
• Make sure the ladder top is not cracked
or loose
• Check the spreaders, make sure they are not
too loose
• Make sure all components are there and
working correctly
• Labels need to be on and legible
(Instructions, Warnings, and Duty Ratings)
• DO NOT tape or drill into any ladder. If you
see any signs of this, remove the ladder
from service.