Brochure

4
LADDER SAFETY PROGRAM GUIDE
RECOMMENDED TRAINING PROGRAM STRUCTURE
I Advance Preparation
This ladder training consists of:
1. LADDER SAFETY
V3
training manual (1 copy)
2. LADDER SAFETY
V3
training video (English & Spanish)
Prior to conducting your first training session, please review the Video and thoroughly study the training manual. As you view
the Video and read the manual, think about the questions that might arise.
Werner products, if available should be taken from customer’s existing inventory for demonstration purposes:
1. Stepladder (1)
2. Extension ladder (1)
3. Podium ladder (1)
4. Twin Stepladder (1)
5. Leansafe ladder (1)
II Conducting the Training Course
A. Introduce the program by reviewing the benefits, then discuss the two leading causes of ladder related injuries: (5 minutes)
a. Using the wrong ladder for the job
b. Misusing or abusing climbing equipment
This program has been established into sections:
a. “How To Choose” the right ladder for the job
b. “How to Use” ladders safely
B. Play the Video (Approximately 20 minutes)
C “How To Choose” the right ladder
i. Style
1. Determine if a stepladder, extension ladder or special application ladder is required
2. Review the various designs available and where they can be used:
EXAMPLE:
1. Twin stepladders are used when two people need to work together on the same job
2. Fiberglass tripod ladders are used to work in tight areas, around corners, through studs and uneven ground
3. Leansafe ladders are used to securely lean against a flat wall surface, wall corner, pole, wall stud and perform
as a standard stepladder.
ii. Select Height (Size)
1. Choose the right stepladder, extension ladder or specialty ladder height
2. Discuss the highest standing level or length
3. Refer to chart located on page 8