Manualshelf

User Manual

ManualsBrandsWesco ManualsOscillating Tools20V Cordless Oscillating Tool Kit, 2.0 Ah Oscillating Multi-Tool, 3° Oscillation Angle, 6 Variable Speed 5000~20000 OPM, 16-Piece Universal Accessoriesy Kit for Sanding Cutting/WS2355KU
78910111213141516
12
EN
APPLICATION
WARNING: The sawing teeth are very sharp. Do not touch during mounting and application. The workpiece
must be clamped tightly before it is cut.
Pic Description Application
Sawing
Universal Metal/Wood End Cut Blade Wood, plastic, fiberglass, nails, non-ferrous
metals, thin sheet metal, hardened fillers
Standard Wood End Cut Blade Wood, plastic, drywall
Precision Wood Cut Blade Wood, soft plastics
Sanding
Sanding Pad (Perforated) Wood, plastic, hardened fillers
Scraping
Rigid Scraper Blade Old paint, hardened adhesives, caulk, carpet
NOTE: When plunging and sawing use a slight pendulum motion, to allow sufficient chip removal. The saw blade lasts
longer if the wear is distributed evenly. To ensure an even distribution, loosen the saw blade, rotate it and retighten
firmly.
Cut/Sand with a constant movement and light pressure. Heavy pressure does not increase the cut/removal rate - the
accessory merely wears faster. Excessive use and heat build up drastically reduces the life of saw blades.