Manualshelf

User Manual

ManualsBrandsWesco ManualsOscillating Tools20V Cordless Oscillating Tool Kit, 2.0 Ah Oscillating Multi-Tool, 3° Oscillation Angle, 6 Variable Speed 5000~20000 OPM, 16-Piece Universal Accessoriesy Kit for Sanding Cutting/WS2355KU
12345678910
9
EN
COMPONENT LIST
1. Tool-less accessory clamping lever
2. On/off switch
3. Battery pack release button
4. Battery pack
5. Variable speed control
6. Venting slot
7. LED light
8. Flange
TECHNICAL DATA
Type WS2355KU (2355 - designation of machinery, representative of cordless multi- function tool)
Voltage
20V
Max*
No load speed 5000-20000/min
Oscillations angle 3.0°
Machine weight 2.65lbs
Battery capacity (WS9970) 2.0Ah Li-ion
Charger Input (WS9924U) 120V~60Hz, 55W
Charger Output 20 V
2.0A
Charging time 1hr
Charger Protection class
/II
* Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts. Nominal voltage is 18 volts.
ACCESSORIES
Battery pack (WS9970) 1
Charger (WS9924U) 1
1-1/8’’ (28mm) standard end cut blade 1
1-1/4” (32mm) standard end cut blade 1
Rigid scraping blade 1
Sanding pad 1
Sanding paper (60 grit) 4
Sanding paper (80 grit) 4
Sanding paper (120 grit) 4
We recommend that you purchase your accessories listed in the above list from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store personnel can assist you and offer advice.