WS2947U (CSR18W) Cordless reciprocating saw 2 EN
1 2 3 4 5 7 6 8
1 1 2 2 Fig.A2 Fig.A1 2 1 Fig.B Fig.C1 Fig.C2 Fig.D 1 2 Fig.E1 Fig.
Fig.E2 Fig.E1 2 1 - Fig.F Fig.G Fig.H Fig.I Fig.J1 Fig.J2 Fig.
PRODUCT SAFETY WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints; • Crystalline silica from bricks and cement and other masonry products; • Arsenic and chromium from chemically-treated lumber.
moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. h) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
RECIPROCATING SAW SAFETY WARNINGS 1. Hold reciprocating saw by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock. 2. Use clamps or another practical way to secure and support the workpiece to a stable platform.
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
COMPONENT LIST 1. 2. 3. 4. 5. 6. 7. 8. Blade Pivot foot plate Tool-free blade clamp lever On/off switch Lock-off button Battery pack Battery pack release button Footplate adjustment lever TECHNICAL DATA Type WS2947U (2947 - designation of machinery, representative of cordless reciprocating saw) Voltage 20V No load speed 0-3000/min Max* Stroke length Max cutting capacity 3/4” Wood 4” Steel 3/8” Machine weight 4.55lbs Battery capacity (WS9940) 4.
OPERATION INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. INTENDED USE The machine is intended for sawing wood, plastic, metal and building materials while resting firmly on the workpiece. It is suitable for straight and curved cuts. ASSEMBLY 1. TOOL-LESS BLADE FITTING AND REMOVING (SEE FIG. A1, A2) 1) Rotate the tool-free blade clamp lever anti-clockwise to its maximized angle and hold it. 2) Insert the blade shank into the blade clamp through the blade guard until it stops.
pressure to decrease speed. 3. HAND GRIP AREAS (SEE FIG. H) Always hold your saw firmly with both hands when operating. 4. PLUNGE CUTTING (SEE FIG. I) WARNING! The plunge cutting procedure is only suitable for treating soft materials such as wood, plaster board or similar! Do not work metal materials with the plunge cutting procedure! Use only short saw blades for plunge cutting. Place the machine with the edge of the blade foot onto the workpiece and switch on.
FCC Part 15 Supplier’s Declaration of Conformity Product Description: Battery charger Model Number: WS9924U Trade Name: WESCO This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Responsible Party : Positec USA, Inc. 10130 Perimeter Parkway, Charlotte, NC 28216 USA Tel.
