Owner manual

ManualsBrandsWesley ManualsHoistBC-6200-8SAC

Factory Service Center

200 International Drive STE 195

Portsmouth, NH 03801

Hours of Operations: 8:30 AM - 5:00 PM Eastern Time

Tel: 603-373-6500

Fax: 603-433-4442

e-mail: obsupport@onboardsolutions.biz

www.onboardsolutions.biz

IMPORTANT NOTICE

This manual contains important safety and operating instructions for ProTech-C model 4815.

Please save and read all safety, operating, and installation instructions before installing or applying

AC power to your ProTech-C series battery charger.

02/09 Rev 48V

specifications subject to change without notice

Pro

Tech

-C

Industrial Battery Charger

Models Part No. DC Amperage No. of Outputs Volts DC

ProTech-C 4815 90435 15 Amps 1 48

Product Manual and Installation Guide

Advanced Electronic, Fully Automatic, 3-Stage On-Board

Industrial Style Battery Charger.

Designed and Constructed to:

UL 1564 3rd Ed.

c UL To: CSA C22.2 No. 107.2-01

FCC Class B

On Board

Solutions

A ProMariner Company

On Board

Solutions

A ProMariner Company

TWO YEAR

LIMITED

WARRANTY

Summary of content (8 pages)

PAGE 1
On Board On Board Solutions Solutions A ProMariner Company A ProMariner Company ProTech-C Industrial Battery Charger Product Manual and Installation Guide TWO YEAR LIMITED WARRANTY Designed and Constructed to: UL 1564 3rd Ed. c UL To: CSA C22.2 No. 107.2-01 FCC Class B Advanced Electronic, Fully Automatic, 3-Stage On-Board Industrial Style Battery Charger.
PAGE 2
Frequently Asked Questions 14 1 Table of Contents CAUTIONS, WARNINGS AND SAFETY INSTRUCTIONS… Setup and Operation… Selecting a Charging Profile and Understanding Battery Types… Pre-installation, Installation... Installation Continued, DC Connections & Wiring Diagrams… Installation Continued, AC Connections... Troubleshooting... Periodic Maintenance... Frequently Asked Questions...
PAGE 3
Periodic Maintenance Cautions, Warnings & Safety Instructions 13 2 Periodic Maintenance Process: For Flooded (Wet) batteries, follow the manufacturers’ instructions to monitor and maintain proper levels of distilled water. (not tap or bottled water that contains minerals) in each battery When: Monthly Process: Clean and tighten all battery connections. Follow manufacturer's instructions for cleaning a battery.
PAGE 4
Cautions, Warnings & Safety Instructions Tr o u b l e S h o o t i n g 12 3 Important Safety Instructions Continued Trouble Shooting 7. WARNING – RISK OF EXPLOSIVE GASES. Note: When working with tools near electricity serious electrical shock can occur resulting in injury. 1) Turn off all power to the charger and disconnect all the DC cables making sure that no cables are in contact with equipment, other wiring, or one another. 2) Please note switch positions before changing settings.
PAGE 5
Cautions, Warnings & Safety Instructions Installation 4 11 Applying AC Power Important Safety Instructions Continued Apply AC power, battery type LED will turn on to indicate the battery type selected as determined by the selector switch shown on page 7. The charging LED will illuminate until proper voltage is achieved. Next, the Charging LED will turn off and Conditioning LED will illuminate.
PAGE 6
Setup and operation Installation 5 10 Setup and Operation Input and Output Connections 1) The ProTech-C Battery Charger is designed as an onboard charger. Note the connections shown below. The On Board Solutions ProTech-C Series Battery charger offers the simplest of connections and is highly flexible to accommodate on-board and portable applications. The ProTech-C employs an IEC AC input connector so no special wiring is necessary.
PAGE 7
Setup and operation Installation 6 9 Programmable Absorption Timer Switch Continued Setup and Operation NOTE: Recommendation assumes charger is rated at 10% of battery system Amp/Hour rating. (Example: 15 amp charger being used on 150 A/H rated system). Use the battery 20A/H system rating to determine. A 6 hour setting is available for larger system amp/hour applications [i.e. 325 A/H] or when 10% rule is exceeded. Consult the factory if you are unsure of what your setting should be.
PAGE 8
Setup and operation Setup and Operation / Understanding Battery Types 7 8 Setup and Operation Continued Setup and Operation Continued Battery Type Selector Switch All ProTech-C Series Chargers employ a user selectable battery type switch that is factory set for flooded (Lead Acid) battery(s) [Profile 1]. Please confirm the appropriate battery type and the orientation of selector switch before use. The ProTech-C has a switch cover to enclose the battery type and the programmable timer switches.