User Manual

24
EUV Owner’s Manual 2 May 22, 2009
Troubleshooting
Introduction
Be sure to follow all safety precautions when checking or repairing any part of the vehicle. Electrical
adjustments control system adjustments should only be made by qualifi ed personnel due to the use of
special equipment and instruments. If you have questions about the sensitivity or diffi culty of an adjust-
ment, call Wesley International at 800-241-2869.
Troubleshooting Tips
Problem Possible Causes What to Do
Vehicle does not run
Motor Send the motor to an authorized motor
service center or replace the motor.
Small 10 amp fuse blown Trace the wires from the fuse and check
for a short (any bare wire that touches
the chassis or common ground wire).
Faulty control circuit:
Solenoid
Battery
Key Switch
Fuse
•
•
•
•
Replace the faulty component.
Check all connections to ensure that all
are clean and tight.
Faulty batteries Check electrolyte levels with a hydrom-
eter, and replace batteries if necessary.
Malfunction of motor controller Check controller faults.
Consult the manufacturer and replace if
necessary.
Motor runs in the
wrong direction
Reversed toggle switch wires Check the forward and reverse toggle
switch for proper connections.
Vehicle loses speed
Malfunction of solid state DC motor
controller or accelerator
Consult the manufacturer and replace if
necessary.