Manual

ASSEMBLY
Assembly requires two persons. Place all parts ofthe exercise cyclein a clearedarea and removethe packing
materials. Do not disposeof the packingmatedals untilassembly is completed.
Assembly requires the included tools and your own adjustable wrench _, Phillips screw-
driver (_3_-, and pliers _.
Use the part drawingsbelow to identifythe small parts used in assembly.The number in parenthesisbelow
each drawing refers to the key numberof the part, from the PART LISTon page 14.The second numberrefers
to the quantityneeded for assembly.Note: Some small parts may have been pre-attached for shipping. If a
part is not in the parts bag, check to see if it has been pre-attached,
M8 Split M8 Nylon M10 Nylon
Washer(42)-10 Locknut (10)-4 Locknut (33)-4
M4 x 16mm
Screw (49)-4
M8 x 15mm Button
Screw (34)-6
MIO x 65mm Carriage Bolt(30)-4
1. While another person lifts thefront of the Frame (1)
slightly,attach a Stabilizer (2) with two M1O x 65mm
Carriage Bolts(30) and two M10 Nylon Locknuts(33).
2. While another personliftsthe rear of the Frame (1)
slightly,attach a Stabilizer (2) withtwo M10 x 65mm
Carriage Bolts (30) and two M10 Nylon Locknuts(33).
33
3O
2
33
2
30
4