User`s manual

ManualsBrandsWeslo ManualsOtherCadence 45 Treadmill

Part No. 215064 R0704A

Printed in USA

2004 ICON IP, Inc.

ORDERING REPLACEMENT PARTS

If you encounter any problems with this product, or if you need to order replacement parts, contact the ICON

Health & Fitness, Ltd. office, or write:

ICON Health & Fitness, Ltd.

Customer Service Department

Unit 4, Revie Road Industrial Estate

Beeston

Leeds, LS11 8JG

Tel:

Outside the UK: 0 (444) 113 387 7133

Fax: 0 (444) 113 387 7125

When ordering parts, please be prepared to give the following information:

• the MODEL NUMBER of the product (WETL05140C)

• the NAME of the product (WESLO CADENCE 45 treadmill)

• the SERIAL NUMBER of the product (see the front cover of this manual)

• the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and the EXPLODED DRAWING on

pages 21 to 23)

USER’S MANUAL

Serial Number Decal

Model No. WETL05140C

Serial No.

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction. If you

have questions, or if there are

missing or damaged parts,

please call:

Or write:

ICON Health & Fitness, Ltd.

Unit 4

Revie Road Industrial Estate

Revie Road, Beeston

Leeds, LS11 8JG

csuk@iconeurope.com

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

www.iconeurope.com

Visit our website at

08457 089 009

Class H Fitness Product

Summary of content (12 pages)

PAGE 1
ORDERING REPLACEMENT PARTS If you encounter any problems with this product, or if you need to order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write: ICON Health & Fitness, Ltd. Customer Service Department Unit 4, Revie Road Industrial Estate Beeston Leeds, LS11 8JG UK Class H Fitness Product Model No. WETL05140C Serial No.
PAGE 2
EXPLODED DRAWING—Model No. WETL05140C R0704A 48 45 2 TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
EXPLODED DRAWING—Model No. WETL05140C 98 56 56 56 56 50 9 9 22 56 19 102 9 27 26 9 9 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 11. If an extension cord is needed, use only a 3conductor, 1mm2 (14-gauge) cord that is no longer than 1.5 m (5 ft.). 2. Use the treadmill only as described in this manual. 12. Keep the power cord away from heated surfaces. 3.
PAGE 4
22. DANGER: Always unplug the power other than the procedures in this manual should be performed by an authorised service representative only. cord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorised service representative. Servicing 23. This treadmill is intended for in-home use only.
PAGE 5
NOTES BEFORE YOU BEGIN Thank you for selecting the WESLO CADENCE® 55 treadmill. The CADENCE 45 treadmill combines advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and privacy of your home. And when you’re not exercising, the unique CADENCE 45 treadmill can be folded up, requiring less than half the floor space of other treadmills. ing this manual, please call our Customer Service Department at 08457 089 009.
PAGE 6
EXERCISE FREQUENCY ASSEMBLY Assembly requires two persons. Place a mat under the treadmill to protect the floor during assembly. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.
PAGE 7
2. See the inset drawing. Identify the Right Upright (37), which has a large round hole near the lower end, and the Left Upright (32). CONDITIONING GUIDELINES WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with pre-existing health problems. is activity that requires large amounts of oxygen for prolonged periods of time.
PAGE 8
5. Attach the end of the ground wire on the Wire Harness (53) to the small hole in the side of the right Handrail (4) with a Silver Ground Screw (89). PROBLEM: The walking belt slows when walked on 5 89 SOLUTION: a. If an extension cord is needed, use only a 3-conductor, 1mm2 (14-gauge) cord that is no longer than 1.5 m (5 ft.). 53 4 6. Place the Console Base (45) on the Handrails (4) (only one Handrail is shown). b.
PAGE 9
8. Set the Console (2) in the Console Base (45). Make sure that no wires are pinched. MAINTENANCE AND TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department. 8 2 45 Attach the Console (2) to the Console Base (45) with six 3/4” Screws (77). Start all six Screws before tightening them; do not overtighten the Screws.
PAGE 10
12. Place the treadmill to the storage position (see HOW TO FOLD THE TREADMILL FOR STORAGE on page 14). HOW TO LOWER THE TREADMILL FOR USE 12 1. Hold the upper end of the treadmill with your right hand as shown. Using your left thumb, press the storage latch and hold it. Pivot the treadmill until the frame and foot rail are past the storage latch. Top View Position the Uprights (32, 37) so that the treadmill Frame (21) is centered between the Uprights. See the lower drawing.
PAGE 11
HOW TO FOLD AND MOVE THE TREADMILL OPERATION AND ADJUSTMENT HOW TO FOLD THE TREADMILL FOR STORAGE THE PERFORMANT LUBETM WALKING BELT Unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.) to raise, lower, or move the treadmill. Your treadmill features a walking belt coated with PERFORMANT LUBETM, a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform.
PAGE 12
CONSOLE DIAGRAM a secure place. Move the on/off switch near the power cord to the “off” position and unplug the power cord. To stop the walking belt, press the Stop button. The elapsed time will begin to flash in the Time/Distance display. HOW TO CHANGE THE INCLINE OF THE TREADMILL Note: During the first few minutes that the treadmill is used, inspect the alignment of the walking belt, and align it if necessary (see page 17).