User`s manual

ManualsBrandsWeslo ManualsOtherCadence 65

Part No. 215081 R0704A

Printed in USA

2004 ICON IP, Inc.

ORDERING REPLACEMENT PARTS

If you encounter any problems with this product, or if you need to order replacement parts, contact the ICON

Health & Fitness, Ltd. office, or write:

ICON Health & Fitness, Ltd.

Customer Service Department

Unit 4, Revie Road Industrial Estate

Beeston

Leeds, LS11 8JG

Tel:

Outside the UK: 0 (444) 113 387 7133

Fax: 0 (444) 113 387 7125

When ordering parts, please be prepared to give the following information:

• the MODEL NUMBER of the product (WETL16140C)

• the NAME of the product (WESLO CADENCE 65 treadmill)

• the SERIAL NUMBER of the product (see the front cover of this manual)

• the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and the EXPLODED DRAWING on

pages 21 to 23)

USER’S MANUAL

Model No. WETL16140C

Serial No.

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction. If you

have questions, or if there are

missing or damaged parts,

please call:

Or write:

ICON Health & Fitness, Ltd.

Unit 4

Revie Road Industrial Estate

Revie Road, Beeston

Leeds, LS11 8JG

csuk@iconeurope.com

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

www.iconeurope.com

Visit our website at

08457 089 009

Class H Fitness Product

Serial Number Decal

Summary of content (12 pages)

PAGE 1
ORDERING REPLACEMENT PARTS If you encounter any problems with this product, or if you need to order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write: Class H Fitness Product ICON Health & Fitness, Ltd. Customer Service Department Unit 4, Revie Road Industrial Estate Beeston Leeds, LS11 8JG UK Model No. WETL16140C Serial No.
PAGE 2
EXPLODED DRAWING—Model No. WETL16140C R0704A 65 49 77 50 TABLE OF CONTENTS 2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
EXPLODED DRAWING—Model No. WETL16140C 98 56 56 56 56 44 9 43 56 46 21 11. If an extension cord is needed, use only a 3conductor, 1mm2 (14-gauge) cord that is no longer than 1.5 m (5 ft.). 2. Use the treadmill only as described in this manual. 12. Keep the power cord away from heated surfaces. 3. Place the treadmill on a level surface, with at least 2.5 m (8 ft.) of clearance behind it and 0.5 m (2 ft.) on each side. Do not place the treadmill on any surface that blocks air openings.
PAGE 4
22. The pulse sensor is not a medical device. Various factors, including your movement, may affect the accuracy of heart rate readings. The sensor is intended only as an exercise aid in determining heart rate trends in general. 23. scribed in this manual. Never remove the motor hood unless instructed to do so by an authorised service representative. Servicing other than the procedures in this manual should be performed by an authorised service representative only. DANGER: Always unplug the power 24.
PAGE 5
EXERCISE FREQUENCY tween workouts. After a few months, you may complete up to five workouts each week if desired. The key to success is to make exercise a regular and enjoyable part of your everyday life. To maintain or improve your condition, complete three workouts each week, with at least one day of rest be- SUGGESTED STRETCHES 1 The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1.
PAGE 6
CONDITIONING GUIDELINES ASSEMBLY Assembly requires two persons. Place a mat under the treadmill to protect the floor during assembly. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.
PAGE 7
PROBLEM: The walking belt slows when walked on 2. Identify the Right Upright (37), which has a large round hole near the lower end, and the Left Upright (32). SOLUTION: a. If an extension cord is needed, use only a 3-conductor, 1mm2 (14-gauge) cord that is no longer than 1.5 m (5 ft.). b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may become damaged. Remove the key and UNPLUG THE POWER CORD.
PAGE 8
5. Identify the Right Handrail (5), which has a large hole in the left side. Feed the Wire Harness (53) into the hole in the bottom of the Right Handrail and out of the large hole in the side. Note: It may be helpful to use needlenose pliers to pull the Wire Harness out of the hole. MAINTENANCE AND TROUBLESHOOTING 5 28 Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed.
PAGE 9
HOW TO LOWER THE TREADMILL FOR USE 7. Place the Console Base (45) on the Right Handrail (5) and the Left Handrail (not shown). Attach the Console Base with four 3/4” Screws (77) (only two Screws are shown). Do not tighten the Screws yet. 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the treadmill down until the frame is past the latch pin. Slowly release the latch knob.
PAGE 10
. Set the Console (2) on the Console Base (45). Insert the excess Wire Harness (53) into the large hole in the side of the Right Handrail (5). Securely tighten the plastic ties on the bottom of the Console Base to prevent the Wire Harness from slipping. Then, cut off the ends of the plastic ties. 10 2 45 53 Ties HOW TO FOLD THE TREADMILL FOR STORAGE Unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.) to raise, lower, or move the treadmill.
PAGE 11
HOW TO CHANGE THE INCLINE OF THE TREADMILL To vary the intensity of your exercise, the incline of the treadmill can be changed. There are four incline levels. Before changing the incline, remove the key and unplug the power cord. Next, fold the treadmill to the storage position (see HOW TO FOLD THE TREADMILL FOR STORAGE on page 15). CAUTION: Before using the treadmill, make sure that both incline pins are fully inserted at the same height. Do not use the treadmill with the incline pins removed.
PAGE 12
CONSOLE DIAGRAM Note: The console can display speed and distance in either miles or kilometres. To change the system of measurement, hold down the Stop button, insert the key into the console, and continue to hold the Stop button for a moment. An “E” (for English) or an “M” (for metric) will appear in the Fat Calories/Calories/Pulse display. Press the Speed s button to change the system of measurement. When the desired system of measurement is selected, remove the key and then reinsert it.