User`s manual

ManualsBrandsWeslo ManualsOtherCadence 700 Treadmill

Model No. WETL26805.1

Serial No.

Write the serial number in the

space above for future reference.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

USER'S MANUAL

Serial

Number

Decal

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction. If you

have questions, or if there are

missing or damaged parts,

please call:

or write:

ICON Health & Fitness, Ltd.

Customer Service Department

Unit 4

Revie Road Industrial Estate

Revie Road

Beeston

Leeds, LS118JG

email: csuk@iconeurope.com

08457 089 009

ORDERING REPLACEMENT PARTS

To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write:

ICON Health & Fitness, Ltd.

Customer Service Department

nit 4, Revie Road Industrial Estate

Revie Road

Beeston

Leeds, LS118JG

Tel:

Outside the UK: 0 (044) 113 387 7133

Fax: 0 (044) 113 387 7125

To help us assist you, please be prepared to give the following information:

• the MODEL NUMBER of the product (WETL26805.1)

• the NAME of the product (WESLO CADENCE 700 treadmill)

• the SERIAL NUMBER of the product (see the front cover of this manual)

• the KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART LIST and the EXPLODED

DRAWING in the centre of this manual)

08457 089 009

Summary of content (12 pages)

PAGE 1
ORDERING REPLACEMENT PARTS To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write: ICON Health & Fitness, Ltd. Customer Service Department Unit 4, Revie Road Industrial Estate Revie Road Beeston Leeds, LS118JG UK Model No. WETL26805.1 Serial No. Tel: USER'S MANUAL Write the serial number in the space above for future reference.
PAGE 2
CONDITIONING GUIDELINES begin to use stored fat calories for energy. If your goal is to burn fat, adjust the speed and incline of the treadmill until your heart rate is near the lowest number in your training zone. WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with pre-existing health problems. TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
PROBLEM: The walking belt slows when walked on IMPORTANT PRECAUTIONS SOLUTION: a. If an extension cord is needed, use only a 3-conductor, 1mm (14-gauge) cord that is no longer than 1.5 m (5 ft.). 2 b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may become damaged. Remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both rear roller bolts counterclockwise, 1/4 of a turn.
PAGE 4
22. Inspect and properly tighten all parts of the treadmill regularly. described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized service representative only. 23. Never drop or insert any object into any opening. 24. DANGER: Always unplug the power 25. This treadmill is intended for in-home use only.
PAGE 5
HOW TO LOWER THE TREADMILL FOR USE BEFORE YOU BEGIN 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the lock knob to the left and hold it. Pivot the frame down until it is past the lock pin. Then, slowly release the lock knob. Frame Lock Knob Thank you for selecting the new WESLO® CADENCE 700 treadmill. The CADENCE 700 treadmill is designed to help you reach your exercise goals in the convenience and privacy of your home.
PAGE 6
ASSEMBLY HOW TO FOLD AND MOVE THE TREADMILL Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. HOW TO FOLD THE TREADMILL FOR STORAGE Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a NW OD WObe D transferred to the top of the walking belt or the shipping small amount of lubricantNmay carton.
PAGE 7
3 Important: When the current period of the program ends, the treadmill will automatically adjust to the speed setting for the next period. Press the Start button or the Speed increase button to start the program. A moment after the button is pressed, the treadmill will automatically adjust to the first speed setting for the program. Hold the handrails and begin walking. To stop the program, press the Stop button. The Time/Pace zone of the display will begin to flash.
PAGE 8
6. Carefully pull the opposite end of the tape to pull the Wire Harness (60) up through the Right Handrail (59) and out of the hole in the side of the Right Handrail. Remove the tape from the Wire Harness (60). 60 59 8 69 IMPORTANT: If a “d” appears in the Digital Speed zone of the display, the console is in the “demo” mode. This mode is intended to be used only when a treadmill is displayed in a store.
PAGE 9
1 The Digital Speed zone of the display will show the speed of the walking belt. Insert the key into the console. See HOW TO TURN ON THE POWER on page 11. 2 The Distance zone of the display will show the distance you have walked or run. The Fat/Calories zone of the display will show the approximate numbers of calories and fat calories you have burned during your workout (see FAT BURNING on page 19). Press the Start button or the Speed increase button to start the walking belt.
PAGE 10
OPERATION AND ADJUSTMENT CONSOLE DIAGRAM THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD This product must be earthed.
PAGE 11
1 Tek Screw (37)–4 Handrail Bolt (20)–4 Frame Bolt (32)–2 1” Bolt (63)–4 PART LIST—Model No. WETL26805.1 Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 1 14 18 5 4 1 3 2 4 4 3 1 5 2 4 1 1 2 1 3 2 3 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 1 1 2 1 2 1 2 1 1 12 1 2 1 1 1 9 1 2 1/4” Star Washer (76)–4 Key No. Qty. R1105A Description Key No. Qty.
PAGE 12
EXPLODED DRAWING—Model No. WETL26805.