Model No. WLTL85051/WLTLSS551 Serial No. Serial Number Decal QUESTIONS? As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or find that there are missing or damaged parts, we will guarantee you complete satisfaction through direct assistance from our factory. TO AVOID UNNECESSARY DELAYS, PLEASE CALL DIRECT TO OUR TOLL-FREE CUSTOMER HOT LINE. The trained technicians on our Customer Hot Line will provide immediate assistance, free of charge to you.
,iiiJiiiiii!F ............ C E ® .._:_!i_i_!,dii!_'_:_. •........ TABLE OF CONTENTS IMPORTANT PRECAUTIONS ................................................................. BEFORE YOU BEGIN ....................................................................... ASSEMBLY ............................................................................... OPERATION AND ADJUSTMENT ............................................................. TROUBLE-SHOOTING AND STORAGE .........................................
IMPORTANT PRECAUTIONS following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately Informed of all warnings and precautions, 2. Use the treadmill only as described in this manual. 3. Place the treadmill on a level surface, with eight feet of clearance behind it. Do not place the treadmill on any surface that blocks air openings.
BEFORE YOU BEGIN Thank you for selecting the WESLO CADENCE s 850 tread_nill. The CADENCE 850 treadmill blends advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and privacy of your home. For your benefit, read this manual carefully before using the treadmill. If you have additional questions, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m.
ASSEMBLY Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Refer to the drawings below to identify small parts used in assembly. TOOLS REQUIRED FOR ASSEMBLY: One adjustable wrench (not included). 3/8" Flange Nut (48)-2 3/8" Washer (50)-4 0o,,,40, 3/8" x 1" Bolt (2)-3 1. Raise the Upright (11) to the vertical position.
4. TheConsole(3)requiresthree"AA"batteries(notincluded); alkalinebatteriesarerecommended. SlideuptheBatteryCover(77). Pressthreebatteriesintothebatterycompartment, withthe negative(-)endsofthebatteriestouchingthe springs.ClosetheBattery Cover. 5. RemovethepaperbackingfromtheWrenchClip(64).Pressthe WrenchClipontotheRightEndcap(63)intheindicatedlocation.PresstheAllenWrench(65)intotheWrenchClip. 64 35 Makesurethatallpartsaretightenedbeforeyouusethetreadmill.
OPERATION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM, a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. They will deteriorate the walking belt and cause excessive wear. risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug.
DIAGRAM OF THE CONSOLE 3eed Control SPEED ON/CLEAR CALORIES/PULSE Note: If there is a thin sheet of clear plastic on the face of the console, remove it. Be careful to avoid spilling liquids on the console. Pulse Sensor Follow the simple steps below to operate the console: Insert the SAFEKEY fully into the power switch.
Carefully step onto the walking belt and begin walking. Change the speed of the walking belt as desired by sliding the speed control. Note: To stop the walking belt, step onto the foot rails and slide the speed control to the "SPEED RESET" position. D the approximate number of nutritional calories you have burned. Note: It also shows your heart rate when your thumb is on the pulse sensor. To reset the three displays, press the ON/CLEAR button. Measure your pulse, if desired.
HOWTOCHANGE THEINCLINEOFTHETREADMILL Adjust To vary the intensity of your exercise, the incline of the treadmill can be changed. There are three different incline settings. Before changing the incline, remove the SAFEKEY and unplug the power cord. To change the incline, carefully lay the treadmill on its left side. Remove the incline pin from the right incline leg as shown. _-Incline TROUBLE-SHOOTING the incline leg to the desired height and fully reinsert the incline pin.
fewminutes.Repeatuntilthewalkingbeltisproperlytightened.Ifthewalkingbeltstillslowswhen walkedon,pleasecallourCustomerService Department. If the walking belt slips when walked on, first remove the SAFEKEY and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform.
CONDITIONING GUIDELINES Training Zone (Beats/Min.) this or any exercise progrem, consult your physlclan_ This is especially important for individuals over the age of 35 or individuals wffh preexisting heatth problems, The pulse sensor is note medical device. may affect the accuracy of heart rate readings; :The sensor is intended only. as an exercise aid in determining heart rate trends in general. The following guidelines will help you to plan your exercise program.
Training Zone Exercise After warming up, increase the intensity of your exercise until your pulse is in your training zone for 20 to 60 minutes. (During the first few weeks of your exercise program, do not keep your pulse in your training zone for longer than 20 minutes.) Breathe regularly and deeply as you exercise--never hold your breath. to cool down. This will increase the flexibility of your muscles and will help to prevent post-exercise problems.
PART LISTmModel Key No. Qty. 1 2 3 4 5* 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 2 3 1 1 1 9 1 1 1 2 1 1 1 1 2 1 2 1 1 1 1 4 4 4 1 2 1 1 2 1 1 1 1 2 9 2 2 2 2 1 3 1 NO.
EXPLODED DRAWING--Model No. WLTL85051/WLTL55551 RO296A 79 3 14 15 ._ 47 I 71 20 7O 12 jll 25 21 \ 22 49 2 28 3O 24 7O 50 43 J 46 44 35 46 45 \ 36 53 J 66 59 j" 50 41 29 41 66 53 15
ORDERING REPLACEMENT PARTS To order replacement pads, call our.Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). When ordering parts, please be prepared to give the following information: • The MODEL NUMBER of the product (WLTL85051/WLTL55551). • The NAME of the product (WESLO CADENCE ®850 treadmill). • The SERIAL NUMBER of the product (see the front cover of this manual).