User`s manual

Insert a 5/16" x 3" Bolt (71) into the lower end of the right

Handrail (1) and into the Frame (46). Reach under the Frame

and tighten a Flange Nut (54) onto the end of the Bolt.

Attach the other Handrail (1) (not shown) in the same manner.

Tighten all bolts used in steps 1 through 3.

Remove the paper backing from the Adhesive Clip (16). Press

the Adhesive Clip onto the Right Endcap (45) in the indicated

location. Press the Allen Wrench (41) intothe Adhesive Clip,

The Console (5) requires three "AA" batteries (not includ-

ed). Alkaline batteries are recommended.

Slide up the Battery Cover (36). Press three batteries into the bat-

tery compartment, with the negative (-) ends of the batteries touch-

ing the springs. Close the Battery Cover.

Make sure that all parts are tightened before you use the treadmill. Note: To protect the floor or carpet from

damage, place a mat beneath the treadmill.