¨ Model No. WLTL62790 Serial No. USER'S MANUAL Find the serial number in the location shown below. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if there are missing parts, we will guarantee complete satisfaction through direct assistance from our factory. TO AVOID UNNECESSARY DELAYS, PLEASE CALL DIRECT TO OUR TOLL-FREE CUSTOMER HOT LINE.
¨ TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 13. Always wear athletic shoes when using the treadmill. Never use the treadmill with bare feet, wearing only stockings, or in sandals. 2.
29. The graphic symbols on the back cover of the TV mean the following: provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
¥ Use jumper wire not smaller than No. 6 AWG (13.3mm2) copper, or the equivalent when a separate antenna-grounding electrode is used. See NEC Section 810-21 (j). the unit is in proper operating condition (refer to the drawing below). ¥ Use No. 10 AWG (5.3mm2) copper, No. 8 AWG (8.4mm2) aluminum, No. 17 AWG (1.0mm2) copper-clad steel or bronze wire, or larger as a ground wire.
BEFORE YOU BEGIN Thank you for selecting the new WESLO¨ CADENCE TV36 treadmill. The CADENCE TV36 treadmill combines advanced technology with innovative design to help you get the most from your exercise program in the convenience of your home. And when youÕre not exercising, the unique CADENCE TV36 can be folded up, requiring less than half the floor space of other treadmills. please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m.
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own phillips screwdriver . Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.
4. Remove the Lock Knob (54) from the Lock Pin (59). 4 Press the Lock Knob Sleeve (55) into the left Upright (61). 54 Make sure that the Lock Pin Collar (57) and the Spring (56) are on the Lock Pin. Insert the Lock Pin into the left Upright (61) and tighten the Lock Knob onto the Lock Pin. 56 57 59 55 61 5. Note the location of the 75 ohm antenna terminal on the treadmill (for clarity, the treadmill is shown in the storage position).
THE PERFORMANT LUBETM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBETM, a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. They will deteriorate the walking belt and cause excessive wear. electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug.
CONSOLE DIAGRAM STEP-BY-STEP CONSOLE OPERATION Note: The console requires two ÒAAÓ batteries (not included). If you have not installed batteries, see assembly step 6 on page 8. Locate the on/off switch near the power cord. Make sure that the on/off switch is in the on position. In addition, make sure that the power cord is properly plugged in (see HOW TO PLUG IN THE POWER CORD on page 9). Note: If there is a thin sheet of clear plastic on the face of the console, remove it before operating the console.
1 CALS/FAT CALS/ SPEED displayÑThis display shows the approximate numbers of calories and fat calories you have burned. (See FAT BURNING on page 22.) In addition, the display shows the speed of the walking belt, in miles per hour. Every seven seconds, the display will change. Arrows in the display will indicate which information is currently shown. Insert the key into the console. Inserting the key will not turn on the displays.
TELEVISION OPERATION DIAGRAM OF THE TELEVISION 3 FEATURES OF THE TELEVISION ¥ Blackstripe picture tube ¥ 181 cable-ready channels (68 standard TV channels and 113 cable channels) ¥ Full-featured on-screen display ¥ User-friendly menu-driven TV controls ¥ Video and audio input jacks ¥ Real time clock with one on-timer and one off-timer ¥ Mono audio ¥ Earphone jack ¥ LED power indicator ¥ Auto memory and auto search for TV channel ¥ Automatically skips unavailable channels in your area 5 1 2 6 7 4 8
Outdoor Antenna BASIC TV OPERATION Outdoor antennas are subject to weathering that can reduce signal quality. Inspect the antenna and lead-in wiring before connecting the antenna. Any service center can explain the various outdoor antennas available. Read the important precautions on pages 3 to 5 of this manual. Before operating the TV, make sure that the on/off switch located near the power cord is in the ÒonÓ position. In addition, make sure that the power cord is properly plugged in (see page 9).
Erasing Channels CHANNEL PROGRAMMING After all channels available in your area have been set into memory, you can erase unwanted channels by following the steps below: Memorizing Channels The TV is equipped with a channel memorizing function that allows you to step up or down from the current channel to the next channel set into memory. Before channels can be selected in this way, they must be set into the TVÕs memory.
Manually Searching for and Storing Channels 1. Press the MENU button to turn on the pop-up menu. Press the MENU button again to select CH MEMORY. 2. Press the + or Ð button to move the arrow to SEARCH/SKIP. Select SEARCH/SKIP by pressing the MENU button. 3. Press the Ð button to select the SEARCH mode. The TV will return to the normal screen after four seconds.
PICTURE LEVEL ADJUSTMENTS USING THE RECORDING TIMER Picture level controls are preset to nominal levels. If desired, you can individually adjust the contrast, brightness, color, or tint by following the steps below. 1. Press the MENU button to turn on the pop-up menu. Your TV has the capability to turn on, switch to a channel for recording, and then turn off againÑall automatically. Follow the instructions below to use this feature.
Setting the Channel to be Recorded 1. After the on timer has been set, press the MENU button repeatedly to select ON CH (on channel). USING THE MENU FUNCTION CLOCK AM 12:00 ON TIME AM 12:00 OFF ON CH 02 TV OFF TIME AM 12:00 OFF When the menu is used, pressing the MENU button will display a menu that allows selection of channel memory, the clock, the on timer, the off timer, or picture level controls. When the MENU button is pressed, the display will be as shown below. 2.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE 1 Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right.
TROUBLE-SHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department tollfree at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). PROBLEM: The power does not turn on SOLUTION: a.
PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length. b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may become damaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn.
PROBLEM: TV reception is poor SOLUTION: a. For the television to operate properly, good reception is necessary. If you are using an antenna, make sure that it is properly connected and that it is adjusted for optimal reception. (See ANTENNA CONNECTIONS on page 12.) b. Check for the problems listed below and follow the applicable instructions.
CONDITIONING GUIDELINES uses easily accessible carbohydrate calories for energy. Only after the first few minutes does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the speed and incline of the treadmill until your heart rate is near the lowest number in your training zone. WARNING: Before beginning this or any exercise program, consult your physician.
PART LISTÑModel No. WLTL62790 R1099A To locate the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual. Key No. Qty.
41 79 43 41 79 44 19 40 39 45 1 33 23 34 42 30 35 31 46 36 109 4 113 36 35 34 32 33 37 19 23 6 109 4 31 30 113 29 19 26 25 26 6 6 15 28 27 7 19 22 8 113 21 12 9 4 109 20 19 11 6 39 39 14 19 79 17 113 7 15 115 4 16 109 48 49 50 52 39 EXPLODED DRAWINGÑModel No.
80 81 47 82 53 72 107 79 77 76 75 116* 100 99 54 61 82 81 18 3 110 101 86 95 94 55 104 80 3 58 111 112 56 57 66 64 72 107 79 39 77 60 111 93 96 92 91 59 62 112 117* 89 90* 112 63 65 64 76 18 79 72 108 62 72 103 75 65 66 79 39 108 107 72 102 67 79 72 79 97 88 68 107 72 72 79 72 105 106 70 83 2 71 85 74 71 87 98 13 60 78 72 71 69 73 2 39 2 2 EXPLODED DRAWINGÑModel No.
ORDERING REPLACEMENT PARTS To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).
