Meijer.com Model No. WLTL29606.0 Serial No. Serial Number Decal USER'S MANUAL QUESTIONS? As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY. CALL TOLL-FREE: 1-866-699-3756 Mon.–Fri., 6 a.m.–6 p.m. MST ON THE WEB: www.wesloservice.com CAUTION Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference.
Meijer.com TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Meijer.com IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. manual and order part number 146148, or see your local electronics store. 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 12.
Meijer.com the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized service representative only. 21. When folding or moving the treadmill, make sure that the storage latch is fully closed. 22. Do not change the incline of the treadmill by placing objects under the treadmill. 23.
Meijer.com BEFORE YOU BEGIN Thank you for selecting the new WESLO® CADENCE G-40 treadmill. The CADENCE G-40 treadmill combines advanced technology with innovative design to help you get the most from your exercise in the convenience of your home. And when you’re not exercising, the CADENCE G-40 treadmill can be folded up, requiring less than half the floor space of other treadmills. number and serial number before contacting us. The model number of the treadmill is WLTL29606.0.
Meijer.com ASSEMBLY To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not G The underside of the treadmill walking dispose of the packing materials until assembly is completed. Note: belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.
Meijer.com 2. Have a second person hold the Base (52) in the position shown. 2 Identify the Left Upright (53) (the Right Upright [54] has a large hole near the lower end). Large Hole 2 Hold the Left Upright (53) so the two small holes for the latch assembly are on top as shown. Attach the Left Upright to the Base (52) with two M10 x 58mm Bolts (2). Do not tighten the Bolts yet. 54 52 2 Small Holes Attach the Right Upright (54) to the Base (52) in the same way. 53 3.
Meijer.com 5. See the left inset drawing and identify a Frame Spacer (11). Hold the Frame Spacer between the Right Upright (54) and the Frame (51). Attach the Right Upright to the Frame with an M10 x 110mm Bolt (1), an M10 Flat Washer (14), and an M10 Star Washer (9); do not tighten the Bolt yet. 5 54 9 1 14 11 51 54 11 14 1 11 9 51 6. Hold the other Frame Spacer (11) between the Left Upright (53) and the Frame (51).
Meijer.com 7. Set the Console (91) face down on a soft surface to avoid scratching it. Hold the Right Handrail (33), which has a large hole in the location shown, near the Console. 7 Console Wire Connector Bracket Next, insert the console wire into the large hole in the side of the Right Handrail (33). Using needlenose pliers, carefully grasp the connector and pull the console wire out of the hole near the bracket on the Right Handrail. Large Hole 33 91 8.
Meijer.com 9. With the help of a second person, hold the Console (91) near the Right Upright (54). 9 Remove the wire tie from the Wire Harness (39) and the console wire. Connect the Wire Harness to the console wire. Make sure to connect the connectors properly (see drawing 9a). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON.
Meijer.com 12. See the lower drawing. Position the Uprights (53, 54) so that the treadmill Frame (51) is centered between the Uprights. 12 1 2 Firmly tighten the two M10 x 110mm Bolts (1) and the four M10 x 58mm Bolts (2). Be careful not to overtighten the M10 x 110mm Bolts. 51 Top View 54 13. Attach the Latch Assembly (48) to the Left Upright (53) with two 18mm Screws (58); start both Screws before tightening either of them. 53 51 13 53 48 58 14.
Meijer.com OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with highperformance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD DANGER: Improper connection of the equipment-grounding conductor can result in an increased risk of electric shock.
Meijer.com CONSOLE DIAGRAM Thumb Pulse Sensor Note: If there are sheets of clear plastic on the console, remove the plastic. Clip Key FEATURES OF THE CONSOLE HOW TO TURN ON THE POWER The treadmill console offers a selection of features designed to make your workouts more effective. Plug in the power cord (see page 12). Next, locate the reset/off circuit breaker on the treadmill frame near the power cord. Make sure that the circuit breaker is in the “reset” position.
Meijer.com The lower left display—As you exercise, the lower left display can show the elapsed time and the distance that you have walked or run. HOW TO USE THE MANUAL MODE 1 Insert the key into the console. See HOW TO TURN ON THE POWER on page 13. 2 Select the manual mode. The lower right display—The lower right display can show the speed of the walking belt and the approximate number of calories that you have burned.
Meijer.com 5 The profiles on the console show how the speed of the walking belt will change during the programs. Measure your heart rate if desired. To measure your heart rate, stand on the foot rails and place your thumb on the pulse sensor (see the drawing on page 13). Do not press too hard, or the circulation in your thumb will be restricted and your pulse may not be detected.
Meijer.com HOW TO CHANGE THE INCLINE OF THE TREADMILL To vary the intensity of your exercise, you can change the incline of the treadmill. There are three incline levels. Before changing the incline, remove the key and unplug the power cord. Next, fold the treadmill to the storage position (see page 17). Incline Pin Incline Pin Incline Legs To change the incline, first remove the incline pin from one of the incline legs.
Meijer.com HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the possibility of injury, do not lift the frame by the plastic foot rails. Make sure to bend your legs and keep your back straight.
Meijer.com HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Next, lower the frame until it is past the latch pin. Then, release the latch knob. Latch Pin Latch Knob 2. Hold the frame firmly with both hands, and lower it to the floor. To decrease the possibility of injury, bend your legs and keep your back straight.
Meijer.com MAINTENANCE AND TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 12).
Meijer.com PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 12. b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may become damaged. Remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both rear roller bolts counterclockwise, 1/4 of a turn.
Meijer.com CONDITIONING GUIDELINES uses easily accessible carbohydrate calories for energy. Only after the first few minutes does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the speed and incline of the treadmill until your heart rate is near the lowest number in your training zone. WARNING: Before beginning this or any exercise program, consult your physician.
Meijer.com SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Hamstrings, back of knees and back. 1 2. Hamstring Stretch Sit with one leg extended.
Meijer.com PART LIST—Model No. WLTL29606.0 R0207B To locate the parts listed below, see the EXPLODED DRAWING on pages 24 to 27. Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 2 4 2 14 6 1 2 6 2 10 2 1 4 2 1 2 1 1 4 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 3 7 1 1 1 6 6 2 4 2 2 1 4 1 2 2 2 1 2 1 2 4 4 4 6 2 2 3 1 1 2 1 1 1 Description Key No. Qty.
29 72 44 40 95 82 74 60 36 21 42 19 75 27 72 6 25 50 29 46 78 36 74 55 21 42 75 10 67 44 46 61 72 10 64 25 95 27 25 19 93 72 68 40 82 86 28 44 25 25 19 51 76 83 41 62 89 71 3 78 96 97 56 101 10 31 28 50 19 25 41 44 96 41 17 94 93 97 18 41 Meijer.com EXPLODED DRAWING A—Model No. WLTL29606.
Meijer.com EXPLODED DRAWING B—Model No. WLTL29606.
Meijer.com EXPLODED DRAWING C—Model No. WLTL29606.
Meijer.com EXPLODED DRAWING D—Model No. WLTL29606.
Meijer.com ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when calling: • the MODEL NUMBER of the product (WLTL29606.