Model No. WLTL42570 _;eria[ No. Serial Number Decal QUESTIONS? As a manufacturer, we are comrn_ed to providing complete customer satisfaction. If you have questions, or if there are mLssJng or damaged parts, we will guarantee complete s_tisfaction through direct assistance from our factory. TO AVOID UNNECESSARY DELAYS, PLEASE CALL DIRECT TO OUR TOLL-FREE CUSTOMER HOT LINE. The trained technicians on our Customer Hot Line will provide immediate assista_ce_ free of charge to you.
TABLE OF CONTENTS IMPORTANT PRECAUTIONS ................................................................. BEFORE YOU BEGIN ....................................................................... ASSEMBLY ............................................................................... OPERATION AND ADJUSTMENT ............................................................. HOW TO FOLD AND MOVE THE TREADMILL MAINTENANCE AND TROUBLE-SHOOTiNG 2 4 5 7 .................................................. ............
The deca! shown below has been placed on your treadmill. If the decal IS miss'rig, or If d "s no! legible please call our Customer s_rvice Department, toll-free, to order a |ree repla_em_t_t decat (.see ORDERING REPLACEMENT pARTS on the back cover of this manual). Apply the decal in t_e Iccatlon shown.
BEFORE YOU BEGIN Thank you for select[ng the WESLO CADENC_ LX25 lreedmill, Tile CADENCE LX25 treadmill combines advanced technology witr_ innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and privacy of your home. And when you're not exercising, the unique CADENCE LX25 can be folded up, requiring less than halt the floor spaca of other treadmills.
ASSEMBLY .... two people Set the treadmlg In a cteared arsa and remove all packing maten_ is . Done Assembly requires dispose of the packing materials until assembly is completed. Refer to the drawings below to }denfify the parts Used.in assembly: Assembly phghp" ._=rewdr,ver _ requires the fo!lowing tools: The include_ and adjustable wrench _ alien wtenchnch_ and your own . U© Handrai_ Screw (32)-2 Handrail Washer (16)-2 L_.tch Screw (13)-2 Console pJate Screw (89)-8 1.
3. With the help of a second person, hold the Console (11 ) near the right Upright (14) as shown. Insert the Wire Harness (26) into the Right Upright (14). Route the Wire Harness (26) through the notch in the bracket on the dght Handrail (2) as shown. Insert the bracket into the right Upright (14). Make sure that the Wire Harness is not pinched. Bracket. 4. Set the Handrails (2) on the Uprights (14) as shown. Thread a Handrail Bolt (15) with a Handrail Washer (16) into each Upright and Handrail.
OPERATION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM, a high-performance lubricant. Important: Never apply silicone spray or other sub* stances to the walking belt or the walking platform. They wgl deteriorate the walking belt and cause excessive wear. electric shock, This product is equipped with a cord having an equipment-grounding conductor and a grounding plug.
DIAGRAM OF THE CONSOLE Inct_eSu(ton Speed Cont_l Monitor Disp(ays Key BA'R'ERY INSTALLATION The co_oJe requires either two Dr three "AA" batteries (not included); alkaline batte es a e recommended. To install batteries, first press the tab on the batte_ cover atld o_etl the balte_j cover. Press the batteries intothebatterycompartment, withthenegativeendsof the batteries (m_rked "-") touching the springs. Press the tab on the battery cover and cio_e the battery cover.
REMOVE THIS EXPLODED DRAWING AND PART LIST FROM THE MANUAL. Save this EXPLODED DRAWING and PART LIST for future reference. Note: Specifications are subject to change without notice. For information about ordering replacement parts, sea the back cover of the User's Manual.
EXPLODED DRAWiNG--Model No. WLTL42570 RO997B 87 86 39 63 32 22 67 75 74 51 72 i.
15 15 16 28 29 13 • 47 35 41 39" 37 54 /52 35
PART LIST--Model No, WLTL42570 Key No. Qty.
STEP BY STEP CONSOLE OPERATION TIME disptay--This display shows the total time that you have walked or run on the treadmW. Belor_ opeta_ing the c_nso_e, rr_ke sure that the power cord is properly plugged in. (S_e HOW TO PLUG IN THE POWER CORD on page 7.) CALORIES This display approximate calodes you burned. Step onto the foot rails of the treadmill. Next, find the cllp aftached to the key (see the drawing on page SI. Slide the clip onto the waistband of your clothing.
[] Change the incline of the treadmill, if desired. ] To increase or decrease the incline, hold down the top or bottom of the incline burton, Important: DO not change the incline of the treadmill by placing objects under the treadmill, Change the incline only as described above. When you are finished exercising, walldng belt and remove the key, stop the Step onto the foot rails, stop the walking belt, and remove the key from the console. Store the key in a secure place.
HOW TO MOVE THE TREADMILL Before moving the treadmill, convert the treadmill to the storage position as descTibed above. Make sLIre that the storage latch is closed fully over the catch. 1. Hold the upper ends of the handrails, the base as shown. Place one foot on 2. Tilt the treadm[l] back until If rolls freely on the front wheels, Carefully move the treadmill to the desired location• Never move the treadmill without tipping it back, or the b_se pads may come off.
m MAINTENANCE AND TROUBLE-SHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed, if furlher assistance is needed, please call our Customer Service Department togfree at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). 1. SYMPTOM: THE POWER DOES NOT TURN ON a.
i 4. SYMPTOM: THE WALKING BELT SLOWS WHEN WALKED ON a. Use only a ULdisted surge protector, rated at 15 arnp8, with a 14-gauge cord of five feet or less in length. b. If the walking belt is o_,edlghtened, treadmill performance may decrease and the walking belt may be perrnanenlty d_roaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn.
CONDiTiONiNG GUIDELINES Fat Burning To burn fat effectively, you must exercise at a relatively low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses easily accessible carbehydrate calories for energy. Orgy after the first few minutes does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the speed and incline of the treadmill until your heart rate is near one of the lower two numbers in your training zone.
A Cool-down Exercise Frequency Finish each workout with 5 to 10 minutes of stretching TO maintain or improve your condition, complete three workouts each week, with at least one day of rest be* tween workouts. After _.few mor3ths of regular exercise, you may complete up to f_veworkouts each week if desired. The key to success is to make exercise a regular and enjoyable part of your _verydey life. to cool down.
ORDERING REPLACEMENT PARTS To order replacement parts, call our Customer Service Department toll-tree at 1=80g-999-3756, Monday through Friday, 6 a,m. until 6 p.m. Mountain Time (e×ciuding hondays). When ordering parts, please be prepared to gwe the following information: • The MODEL NUMBER OF THE PRODUCT • The NAME OF THE PRODUCT • The SERIAL NUMBER • The KEY NUMBER (WLTL42570). (WESLO CADENCE _ LX25 treadmill). OF THE PRODUCT (see the front cover of this manual).
