User`s manual

7
1. Make sure that the power cord is unplugged.
Orient the Base (101) as shown.
Attach four Base Feet (100) to the Base (101) in
t
he locations shown with four M4.2 x 19mm Tek
Screws (14).
1
14
1
00
100
100
100
101
14
14
14
2. Identify the Right Upright (98), which has a large
hole in the location shown.
Orient the Right Upright (98) and the Base (101)
as shown. Attach the Right Upright to the Base
with two M10 x 53mm Patch Bolts (18) and two
M10 Flat Washers (16); do not fully tighten the
Patch Bolts yet.
101
18
16
98
2
Large
Hole